Lincoln Electric IM833-C manual Installation

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - Ranger 250 ( K1725-6, K1725-7, K1725-8, K1725-9)

INPUT - GASOLINE ENGINE

Make/Model

Description	Horsepower	Operating	Displacement cu. in.(cu. cm)
	@ 3600 RPM	SPEED	Bore x Stroke in.(mm)

Starting System

Capacities

K1725-7,-8				38 (624)	12VDC Battery	Fuel: 12gal.(45.4L)
Kohler CH20		20 HP		3.03x 2.64 (77x67)		Oil: 2.0qts.(1.9L)
OHV			High		and starter
	2 Cylinder
K1725-6			3700RPM		Push Button
	4 Cycle
Onan P220	Air Cooled		Full Load		Starter
OHV	Gasoline	20.5 HP	3500RPM	39.9 (653)		Fuel: 12gal.(45.4L)
	Engine			3.15x 2.56 (80x65)	Group 58 Battery	Oil: 1.6qts.(1.6L)
K1725-9			Low Idle
					(435 cold
			2400RPM
Robin-Subaru					crank amps)
EH64

RATED OUTPUT @ 104°F(40C°) - WELDER

Welding Output	Volts at Rated Amps	Duty Cycle Max.	OCV @ 3700 RPM
CC STICK & PIPE DC Output	28 Volts at 250 Amps	100%
STICK / PIPE Output Range	40 to 250 Amps
TIG Output Range	20 to 250 Amps		60 Volts
CV WIRE DC Output	28 Volts at 250 Amps	100%
CV WIRE DC Output	27 Volts at 275 Amps	60%
CV WIRE Output Range	14 to 28 volts

RATED OUTPUT @ 104°F(40C°) - GENERATOR

Auxiliary Power 1

9,000 Watts Peak, 8500 Watts Continuous, 60 Hz

120/240 Volts

PHYSICAL DIMENSIONS

HEIGHT		WIDTH		DEPTH		WEIGHT
30.00** in.		21.50 in.		42.25 in.
762.0 mm		546.0 mm		1073.0 mm	500 lbs. (227kg.)
**Top of enclosure, add 6.4” (164mm) for exhaust.
		ENGINE COMPONENTS
LUBRICATION		VALVE LIFTERS	FUEL SYSTEM			GOVERNOR
Full Pressure	Solid-(Onan P220 OHV		Diaphragm Pulse Pump-(Onan OHV			Mechanical Governor
with Full Flow Filter		and Robin-Subaru		and Robin-Subaru)		5% Regulation (Kohler) Centrifugal
	Hydraulic- (Kohler)		Mechanical Fuel Pump (Kohler)			Flywheel -(Onan And Robin-Subaru)
AIR CLEANER		ENGINE IDLER		MUFFLER		ENGINE PROTECTION
			Low noise Muffler: Top outlet			Shutdown on low oil
Dual Element		Automatic Idler	can be rotated. Made from			pressure.
			long life, aluminized steel.

1.Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

RANGER 250