Lincoln Electric IM806 manual Recommended Equipment, Stick, Tig, Wire Feed

Page 24

C-2	ACCESSORIES	C-2

RECOMMENDED EQUIPMENT

STICK

K704 Accessory Kit which includes:

•Electrode Holder & Cable

•Work Clamp & Cable

•Headshield

K892-1 Remote Control Receptacle Kit and K857 Remote Control Kit are optional for remote current control.

TIG

Magnum™ TIG Torch

Magnum Parts Kit and Argon Gas

K930-2 TIG Module (requires K938-1 Contactor Kit)

K939-3 Control Cable (see Optional Equipment)

Optional:

•K939-1 Docking Kit

•K963 Hand Amptrol®

•K870 Foot Amptrol

•K892-1 Remote Control Receptacle Kit

•K915-1 Adapter Cable

WIRE FEED

K449 LN-25 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid. K892-1 Remote control Receptacle Kit and K444-1 Remote voltage Control Kit are required for voltage control at the feeder.

LN7-K240 Contactor Kit is required.

Magnum Gun is required for gas-shielded welding.

Innershield Gun is required for gasless welding.

WELDMARK 225

Image 24

Contents Weldmark Safety California Proposition 65 WarningsElectric Shock can kill Cylinder may explode if damaged Précautions DE Sûreté Sûreté Pour Soudage a L’ArcThank You Table of Contents Installation Height Width Depth WeightWeldmark Specifications Installation Instructions Machine GroundingSpark Arrester LiftingPRE-OPERATION Service Welding Output CablesTotal Combined Length Electrode and Work Cables GasolineConnection of Wire Feeders Angle of OperationHigh Altitude Operation Location / VentilationAdditional Safety Precautions Auxiliary PowerInstructions Connection of K930- TIG Module to the WeldmarkDuplex Receptacles Motor StartingThese Devices Without Auxiliary Power While Welding Simultaneous Welding and PowerStandby Power Connections Connection of Weldmark 225 to Premises Wiring Design Features Other FeaturesEngine Features Operation20 H.P. Command Polarity SwitchRange Switch Control SwitchBREAK-IN Period Stopping the EngineWire Feed Welding Processes Constant Voltage Welding ProcessDuty Cycle Stick Constant Current WeldingHigh Accessories K1745-1 Single GAS Cylinder HolderWire Feed Recommended EquipmentStick TIGMaintenance Safety PrecautionsRoutine Maintenance Engine OIL ChangeOIL Filter Change RangerEngine Adjustments Gfci Receptacle Testing and Reset Ting Procedure Troubleshooting HOW to USE Troubleshooting GuideTroubleshooting Troubleshooting Weldmark 225 Wiring Diagram Code DiagramsWeldmark 225 / LN-25 Across the ARC Connection Diagram Connection of Weldmark 225 to LN-7 & K240 Contactor KITM17215-2 30-98E Precaucion Warnung Manufactured by Lincoln Electric Company