Lincoln Electric IM736-D 4OPERATIONB-4, Setting and Configuring the Power MIG 300 for Welding

Page 16

B-4OPERATIONB-4

SETTING AND CONFIGURING THE POWER

MIG 300 FOR WELDING

•Check that the electrode polarity is correct for the process and turn the Power Switch to the "ON" position. After the "boot-up" period (approximately 20 seconds), the POWER MIG 300 will default to the last preset weld mode that was active when the machine was powered down. The Multi- Process Panel defaults with the "Weld Mode" active.

•Toggle the SET switch to the desired "Weld Mode" opera- tion. The Multi-Process Meter displays a weld mode num- ber corresponding to a CC or CV welding process as detailed by the chart on the right side of the panel. In the example shown in Figure B.2 “3” is displayed above the SET switch. This means that the machine is set for CC- GTAW (TIG) welding.

•Toggle the SELECT switch to activate the "weld parame- ters" for the selected weld mode.

•Set each parameter using the SET switch to adjust the parameter displayed on the display meter.

NOTE: If the LED next to the weld parameter is flashing, the WFS/AMP and/or the Volt/Trim values can also be adjusted for that parameter using the control knobs below each dis- play meter. An LED below each of the displays will also be flashing to indicate which value is adjustable.

The Table B.1 shows which weld parameters are adjustable for a given weld mode. The weld parameters are detailed later in this section.

FIGURE B.2

3

 

 

 

 

TABLE B.1

 

 

 

 

 

 

 

 

 

 

 

 

PREFLOW /

RUN IN

START

ARC CONTROL

CRATER

BURNBACK

SPOT

 

POSTFLOW

 

 

 

 

 

 

CC-STICK

-----

-----

Yes

Yes

-----

-----

-----

CC-GTAW

Yes

-----

Yes

-----

-----

-----

-----

CV-FCAW

-----

Yes

Yes

Yes

Yes

Yes

Yes

CV-GMAW

Yes

Yes

Yes

Yes

Yes

Yes

Yes

CV-GMAW-P

Yes

Yes

Yes

Yes

Yes

Yes

Yes

POWER

Yes

Yes

Yes

Yes

Yes

Yes

Yes

 

 

 

 

 

 

 

 

POWER MIG 300

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Power MIG Safety Depends on YouSafety California Proposition 65 WarningsElectric Shock can kill Welding Sparks can cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a L’ArcThank You Table of Contents Installation Technical Specifications Power MIGSafety Precautions Uncrating the Power MIGInput POWER, Grounding and Connection Diagrams LocationFigure A.1 Triple Voltage Machine Input Connections GUN and Cable Installation Liner Installation and Trimming Instruction see Figure A.3GUN & Cable Assembly Installed Into the Power MIG Shielding GASInstallation Definitions of Welding Modes OperationCommon Welding ABBREVIA- Tions Other features Controls and SettingsProduct Description Operations Setting and Configuring the Power MIG 300 for Welding 4OPERATIONB-4Weld Mode Start ProcedureMULTI-PROCESS Panel Functions Preflow / PostflowArc Control See Table B.2 Wire Drive Roll CraterBurnback SpotProcedure for Changing Drive and Idle Roll Sets Wire Reel Loading READI-REELS, Spools or CoilsIdle Roll Pressure Setting Feeding Wire ElectrodeAvoiding Wire Feeding Problems Special Welding Processes Available on the Power MIG Pulse Welding GMAW-PPULSE-ON-PULSE GMAW-PP Benefits of Pulse on Pulse from Lincoln ElectricPower Mode Recommended Welding Procedures for Power Mode Table B.4Accessories Drive Roll KitsK363P READI-REEL Adapter Dual Cylinder Mounting KIT K1702-1Non-Synergic Weld Modes Mode PUSH-PULL Feeding Connection Adapter KIT K2154-1Synergic Weld Modes Remember do not change the WFS at the spool gunMaintenance Liner Removal and Replacement See Figure D.11TROUBLESHOOTINGE-1 Locate Problem SymptomProblems Possible Areas Symptoms Misadjustments TroubleshootingRecommended Course of Action Output Problems Feeding Problems GAS Flow Problems Displays Description Scrolling dash Push Pull Wire Feeding Problems Troubleshooting Tight. The tension arm should be Stall Factor Number Adjustment Wiring Diagrams G3852Codes 10952 only G4068Wiring Diagram Power MIG 300 for Codes 10958 Wiring Diagram Wiring Diagram Power MIG 300 for Codes 11097Dimension Print M19231Power MIG Power MIG Precaucion Warnung

IM736-D specifications

The Lincoln Electric IM736-D is a state-of-the-art industrial welding machine designed to meet the demanding needs of modern welding operations. Known for its robustness and versatility, this machine is specifically engineered for high-performance applications, making it an essential tool for professionals in various sectors, including construction, manufacturing, and maintenance.

One of the main features of the IM736-D is its advanced control system, which allows for precise adjustments to be made during the welding process. This feature provides welders with the ability to tailor their settings for different materials and thicknesses, ensuring optimal results every time. The machine also incorporates digital technology, providing an intuitive interface that simplifies operation and enhances user experience.

The IM736-D is built with a durable construction, ensuring longevity and reliable performance in high-demand environments. Its robust chassis is designed to withstand the rigors of daily use, while also being lightweight enough for easy transport between job sites. This balance of strength and portability makes it an ideal choice for contractors and fabricators alike.

In terms of welding technology, the IM736-D utilizes inverter technology, which contributes to its compact design and energy efficiency. This cutting-edge technology allows for quicker response times and stable arc performance, thus reducing the likelihood of defects in the weld. The machine supports various welding processes, including MIG, TIG, and Stick welding, making it a versatile option for a wide range of applications.

Additional characteristics include a built-in wire feeder, which facilitates seamless operations and minimizes downtime. The IM736-D also features advanced safety systems, such as overcurrent protection and thermal overload indicators, enhancing the safety of the operator during use.

Overall, the Lincoln Electric IM736-D stands out for its combination of innovative features, user-friendly technology, and robust construction. With its ability to deliver high-quality welds across various materials and welding processes, it remains a top contender in the industrial welding market, offering reliability and performance for professionals who demand the best.
Top Page Image Contents