Milwaukee 0719-20 Maintenance Five Year Tool Limited Warranty, Accessories, Maintaining Tool

Page 6

MAINTENANCE

WARNING!

FIVE YEAR TOOL LIMITED WARRANTY

WARNING!

To reduce the risk of personal in- jury, always unplug the charger and remove the battery pack from the charger or tool before per- forming any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tool

Keep your tool, battery pack and charger in good repair by adopting a regular main- tenance program. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for:

Lubrication

Brush inspection and replacement

Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

Electrical inspection (battery pack, charger, motor)

Testing to assure proper mechanical and electrical operation

WARNING!

To reduce the risk of personal in- jury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them.

Cleaning

Clean out dust and debris from vents and electrical contacts by blowing with com- pressed air. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger, keeping away from all electrical contacts. Certain clean- ing agents and solvents are harmful to plas- tics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household deter- gents containing ammonia. Never use flam- mable or combustible solvents around tools.

To reduce the risk of injury or explosion, never burn or inciner- ate a battery pack even if it is dam- aged, dead or completely dis- charged. When burned, toxic fumes and materials are created.

Disposing of Lithium-Ion Battery Packs

Lithium-Ion battery packs are more envi- ronmentally friendly than some other types of power tool battery packs (e.g., nickel- cadmium). Always dispose of your battery pack according to federal, state and local regulations. Contact a recycling agency in your area for recycling locations.

Even discharged battery packs contain some energy. Before disposing, use elec- trical tape to cover the terminals to prevent the battery pack from shorting, which could cause a fire or explosion.

Repairs

For repairs, return the tool, battery pack and charger to the nearest authorized ser- vice center.

Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and work- manship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase. Note the warranty period for V28 Battery Packs is two (2) years from the date of purchase.

THEREPAIRANDREPLACEMENTREMEDIES DESCRIBEDHEREINAREEXCLUSIVE.INNO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack to a MILWAUKEE service facility for repairs.

Maintaining and Storing Battery Pack

V28™ Lithium-Ion battery packs will oper- ate for many years and/or hundreds of charging cycles when they are maintained and used correctly. Refer to your battery pack and charger operator's manual for proper care and use.

10

ACCESSORIES

WARNING!

Always remove battery pack before changing or removing ac- cessories. Only use accessories specifically recommended for this tool. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local dis- tributor or a service center.

See Pages 34 & 35 for a listing of Super Sawzall® Blades

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

11

Image 6
Contents 0719-20 Personal Safety Battery Tool USE and Care Work Area SafetyElectrical Safety Power Tool USE and CareSpecific Safety Rules Tool AssemblyFunctionaldescription Quik-LokBlade Clamp Maintenance OperationRemoving broken blades from the Quik-LokBlade Clamp Starting, Stopping and Controlling Speed Battery Pack ProtectionV28 Lithium-Ion Battery Pack Electric BrakeMaintaining and Storing Battery Pack Maintenance Five Year Tool Limited WarrantyAccessories Maintaining ToolSécurité Électrique Conserver CES InstructionsSécurité DU Lieu DE Travail Sécurité IndividuelleEntretien Règles DE Sécurité SpécifiquesDescriptionfonctionnelle Montage DE L’OUTIL Fonctionnement Avertissement Entretien Avertissement Coupe en plongée FigEntretien et remisage de la batterie Guarde Estas Instrucciones Accessoires AvertissementGarantie Limitée DE ’OUTIL DE Cinq ANS Seguridad EN EL Área DE TrabajoUSO Y Cuidado DE LAS Herramientaseléctricas USO Y Cuidado DE LAS Reglas DE SeguridadEspecíficas MantenimientoMontaje DE LA Herramienta DescripciónfuncionalExtracción de seguetas rotas del portaseguetas Quik-Lok Funcionamiento ¡ADVERTENCIAMantenimiento del portaseguetas Quik-Lok Interruptor de velocidad alta/baja/ traba del gatillo FigProtección de la batería Encendido, parada y control de la velocidadFreno eléctrico Funcionamiento en clima fríoReparaciones Mantenimiento ¡ADVERTENCIA Garantía Limitada DE Cinco AñosAccesorios ¡ADVERTENCIA Mantenimiento y almacenamiento de la bateríaLe Bois Fax Milwaukee Electric ToolWest Lisbon Road Brookfield, Wisconsin, U.S.A