General SAFETY
WARNING
Read all instructions
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your
save these instructions
POWER Tool use and care
16. | Do not force the power tool. Use the |
| correct power tool for your applica- |
| tion. The correct power tool will do the |
| job better and safer at the rate for which |
| it was designed. |
17. | Do not use the power tool if the switch |
| does not turn it on and off.Any power tool |
| that cannot be controlled with the switch is |
| dangerous and must be repaired. |
18. | Disconnect the plug from the power |
| source and/or the battery pack from |
SPECIFIC SAFETY RULES
1. | Use auxiliary handles supplied with |
| the tool. Loss of control can cause |
| personal injury. |
2. | Wear ear protectors with impact |
| drills. Exposure to noise can cause |
| hearing loss. |
3. | Hold power tools by insulated grip- |
| ping surfaces when performing an |
| operation where the cutting tool may |
| contact hidden wiring or its own cord. |
| Contact with a “live” wire will make ex- |
work area SAFETY
1.Keep work area clean and well lit. Cluttered or dark areas invite acci- dents.
2.Do not operate power tools in ex- plosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power tool. Distrac- tions can cause you to lose control.
electrical safety
4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
7.Do not abuse the cord. Never use the cord for carrying, pulling, or unplug- ging the power tool. Keep cord away from heat, oil, sharp edges, or mov- ing parts. Damaged or entangled cords increase the risk of electric shock.
8.When operating a power tool out- doors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of elec- tric shock.
personal safety
9.Stay alert, watch what you are do- ing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
10.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
11.Avoid accidental starting. Ensure the switch is in the
12.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotat- ing part of the power tool may result in personal injury.
13.Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.
14.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
15.If devices are provided for the connec- tion of dust extraction and collection facilities, ensure these are connected and properly used. Use of these de- vices can reduce
the power tool before making any |
adjustments, changing accessories, |
or storing power tools. Such preven- |
tive safety measures reduce the risk of |
starting the tool accidentally. |
19. Store idle power tools out of the reach |
of children and do not allow persons |
unfamiliar with the power tools or |
these instructions to operate power |
tools. Power tools are dangerous in the |
hands of untrained users. |
20. Maintain power tools. Check for |
misalignment or binding of moving |
parts, breakage of parts and any |
other condition that may affect the |
power tool's operation. If damaged, |
have the power tool repaired before |
use. Many accidents are caused by |
poorly maintained power tools. |
21. Keep cutting tools sharp and clean. |
Properly maintained cutting tools with |
sharp cutting edges are less likely to |
bind and are easier to control. |
22. Use the power tool, accessories and |
tool bits etc., in accordance with |
these instructions and in the manner |
intended for the particular type of |
power tool, taking into account the |
working conditions and the work to |
be performed. Use of the power tool for |
operations different from those intended |
could result in a hazardous situation. |
service
23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
posed metal parts of the tool “live” and |
shock the operator. |
4Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
5.WARNING! Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known to cause cancer, birth defects or other reproduc- tive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically- treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ven- tilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles.