Craftsman 919.72427 owner manual Air Filter Inspection and Replacement, Motor, Air Filter Cover

Page 17

Water will condense in the air

tank. If not drained, water will corrode and weaken the air tank causing a risk of air tank rupture.

6.After the water has been drained, close the drain valve (clockwise). The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, the reinstalled.

Air Filter - Inspection and Replacement

Hot surfaces. Risk of burn.

Compressor heads are exposed when filter cover is removed. Allow compressor to cool prior to servicing.

A dirty air filter will not allow the compressor to operate at full capacity. Keep the air filter clean at all times.

1.Remove the air filter cover.

Air Filter

Air Filter

Cover

2.Remove the air filter and make sure it is clean.

IMPORTANT: Do not operate the compressor with the air filter removed.

3.If dirty, rinse air filter with warm water and squeeze dry.

4.Replace air filter and air filter cover.

NOTE: If the air filter is extremely dirty it will need to be replaced. Refer to the "Repair Parts" for the correct part number.

Air Compressor Pump Intake and Exhaust Valves

Once a year have a Trained Service Technician check the air compressor pump intake and exhaust valves.

Inspect Air Lines and Fittings for Leaks

1.Turn the air compressor on to inspect for air leaks.

2.Apply a soap solution to all air line fittings and connections/piping.

3.Correct any leaks found.

IMPORTANT: Even minor leaks can cause the air compressor to overwork, resulting in premature breakdown or inadequate performance.

Motor

The motor has an automatic reset thermal overload protector. If the motor overheats for any reason, the overload protector will shut off the motor. The motor must be allowed to cool down before restarting. The compressor will automatically restart after the motor cools.

If the overload protector shuts the motor off frequently, check for a possible voltage problem. Low voltage can also be suspected when:

1.The motor does not get up to full power or speed.

2.Fuses blow out when starting the motor; lights dim and remain dim when motor is started and is running.

17- ENG

D24450

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Sold by Sears Canada, Inc. Toronto, Ont. M5B 2B8 AIR CompressorTable of Contents Safety Guidelines Definitions Specification ChartImportant Safety Instructions Model No 919-724270Risk of Explosion or Fire HazardRisk from Flying Objects Risk of BurstingRisk to Breathing Risk of Electrical ShockRisk of Falling Risk of BurnsRisk from Moving Parts Risk of Unsafe Operation Accessories AccessoriesGlossary Duty CycleInstallation AssemblyVoltage and Circuit Protection Wiring InstructionsAir Distribution System Risk of ElectricalTypical Compressed AIR Distribution System Know Your Air Compressor OperationDescription of Operation Drain ValveBefore Starting How to StopCheck Valve Pressure Release ValveBefore Each Start-Up How to StartTo Check Safety Valve MaintenanceCustomer Responsibilities To Drain TankAir Compressor Pump Intake and Exhaust Valves Air Filter Inspection and ReplacementInspect Air Lines and Fittings for Leaks MotorTo Replace or Clean Check Valve Service and AdjustmentsNut Outlet Tube Pressure Relief Check Valve Screwdriver Open position nothing is visibleStorage Problem Cause Correction TroubleshootingProblem Cause Correction Check wiring connection Sears Canada, Inc., Toronto, Ont. M5B 2B8 Table DES MatièresConsignes DE Sécurité Importantes Tableau DES SpécificationsMesures DE Sécurité Définitions Risque Risque D’EXPLOSION OU D’INCENDIERisque DE Projection D’OBJETS Risque D’ÉCLATEMENTRisque PAR Inhalation Risque DE Choc ÉlectriqueRisque DE Chute Risque DE BrûluresRisque Relié AUX Pièces Mobiles Risque Dune Utilisation Dangereuse Cycle DE Service AccessoiresAccessoires LexiqueAssemblage Directives DE Mise À LA Terre Directives de câblageTension et protection des circuits Système de distribution dairSystème DE Distribution Dair Typique Description du fonctionnement UtilisationFamiliarisez-vous avec votre compresseur dair Avant le démarrage Utilisation de lappareilArrêt de lappareil Procédures de rodageMise en marche Avant chaque mise en marcheResponsabilités du client EntretienVérification de la soupape de sûreté Vidange du réservoirFiltre à air Filtre à air Inspection et remplacementMoteur Entretien ET Réglages Remplacement ou nettoyage de la soupape de retenueRangement Problème Cause Correction DépannageSerrer Peut éclater ou exploserCognements Pas Surcharges déclenché Remarque ENG D24450 Get it fixed, at your home or ours
Top Page Image Contents