Friedrich 920-087-09 (12/10) Unit Damage Hazard, Shipping Tape Location, Shipping Screw Location

Page 17

CAUTION

Unit Damage Hazard

Failure to follow this caution may result in equipment damage or improper operation.

Failure to remove shipping tape and screw will prevent fresh air vent door from opening and may result in damage to vent door cable.

3.Carefully remove shipping tape from the front panel and vent door. See Figure 20

Figure 20

Shipping Tape Location

SHIPPING

TAPE

FRP020

4.Remove shipping screw from the vent door, if present. See Fig 21.

Figure 21

Shipping Screw Location

REMOVE SHIPPING

SCREW IF PRESENT

FRP021

5. Remove front panel. See Figure 22.

Figure 22

Removing Front Panel

2

1

FRP022

Pull out at the bottom to release it from the tabs (1). Then lift up (2).

NOTE: If the unit is mounted flush to the floor, the service cord MUST be rerouted at the bottom of the front cover on the side closest to the receptacle. A notch MUST be made in the front cover side where the cord exits the unit. It is the responsibility of the installer to create an exit notch.

17

Image 17
Contents Ptac Table of Contents General Instructions Read Installation Operation ManualCongratulations Installation Checklist General SpecificationsTypical Building Plan View Ptac Installation RecommendationsFor Deep Wall Installation Greater than 13 1/4 See Wall Sleeve Installation Instructions PdxwsTypical Wall Sleeve Installation Falling Object HazardPanel Wall Alternate Wall InstallationsFrame and Brick Veneer Curtain WallWall Sleeve Attachment DimensionsLintel Installation One-Piece Deep Wall Sleeve Installation PdxwsextInternal Drain Drain Kit Location and InstallationDrain Kit Installation Cover Plate InstallationDrain Tube Installation See Figure Standard Grille Pxga Standard Grille Installation InstructionsElectrical Rating Tables Power Cord Information 230/208V models onlyAll 230/208 volt units are equipped with power cords Electrical Shock Hazard Electrical Wiring for 265 Volt ModelsPower Cord Installation To Chassis Junction Suffocation Hazards Chassis Install PreparationShipping Screw Location Unit Damage HazardShipping Tape Location Securing Unit Chassis InstallationExcessive Weight Hazard Power Connection How To ConnectFriedrich Ptac Digital Control and Unit Features Page System Configuration Dip Switches Digital Control User Input ConfigurationDip Switch Setting Digital Control Operation Remote Control Thermostat Installation Energy Management Desk Control TerminalsRoutine Maintenance Complaint Cause Solution Basic TroubleshootingService & Assistance New Construction Accessories AccessoriesPxcja Friedrich Packaged Terminal AIR Conditioners and Heat Pumps This page Intentionally Left Blank This page Intentionally Left Blank This page Intentionally Left Blank

920-087-09 (12/10) specifications

The Friedrich 920-087-09 (12/10) is a remarkable air conditioning unit that exemplifies innovation in climate control technology. Designed for both residential and commercial environments, this model stands out for its efficiency, reliability, and user-friendly features.

One of the key characteristics of the Friedrich 920-087-09 is its impressive cooling capacity. With a nominal cooling power of 12,000 BTU, it is ideal for medium to large spaces, effortlessly maintaining comfortable indoor temperatures even during the hottest months. The unit offers a seasonal energy efficiency ratio (SEER) that meets contemporary standards, ensuring that it operates efficiently while consuming less energy. This feature not only lowers electricity bills but also reduces the overall environmental impact.

The Friedrich 920-087-09 is equipped with advanced inverter technology, allowing it to adjust its cooling power according to the temperature needs of the room. This results in quieter operation and enhanced energy savings as the unit avoids the frequent on-off cycles typical of conventional systems. Furthermore, the unit boasts a variable-speed compressor that guarantees consistent performance and improved humidity control.

Another standout feature of the Friedrich 920-087-09 is its sophisticated air filtration system. It includes a washable filter that captures dust, pollen, and other airborne particles, promoting cleaner air quality. This is particularly beneficial for those with allergies or respiratory issues, creating a healthier living environment.

The unit also features a customizable digital thermostat that allows users to set precise temperature preferences. With its user-friendly interface, users can easily switch between different modes, including cooling, heating, and dehumidifying, adding to the flexibility of the system. Additionally, Friedrich's exclusive Quiet Master technology minimizes noise levels, making it suitable for bedrooms, offices, and other quiet areas.

The Friedrich 920-087-09 also comes with a range of connectivity options, including Wi-Fi integration. This functionality allows users to control the air conditioning unit remotely through a smartphone app, making it exceptionally convenient for those with busy lifestyles.

Overall, the Friedrich 920-087-09 (12/10) combines cutting-edge technology, energy efficiency, and a host of user-friendly features, making it a top choice for anyone looking to enhance their indoor comfort. Its design is not only functional but also aesthetically pleasing, allowing it to blend seamlessly with a variety of interiors.