Xantrex Technology HF 1800, HF 1000 manual Adjusting Display, Alarm, and Charging Current Settings

Page 31

Adjusting Display, Alarm, and Charging Current Settings

Adjusting Display, Alarm, and Charging Current Settings

The two display panel buttons can be used to adjust the following:

•What is being displayed on the screen,

•To disable or enable the audible alarm, and

•To change the charging current.

STATUS
Utility		Input Voltage (V)
Battery	Select	Input Current (A)
Fault		Output Power (kW)
Fault

FREEDOM

HF 1000

Figure 3-2Display Panel

To adjust what is being displayed on the screen:

By default the screen displays the Input Voltage value in Volts and the Input Voltage LED is illuminated.

1.Press the Select button once.

The display will show the DC Input Current and the DC Input Current LED will illuminate.

The value is displayed on the screen as Amps.

2.Press the Select button once again.

The display will show the AC Output Power and the AC Output Power LED will illuminate.

The value is displayed on the screen as kWatts.

3.Press the Select button once again.

The display will show the DC Input Voltage and the DC Input Voltage LED will illuminate.

The value is displayed on the screen as Volts.

975-0390-01-01

3–3

Image 31

Contents Freedom HF Page Freedom HF Inverter/Charger Date and Revision Audience About This GuidePurpose ScopeRelated Information Conventions UsedImportant Safety Instructions Safety Personal Precautions When Working With Batteries Marine Unit Location Precautions for Using Rechargeable Appliances Page Contents Specifications TroubleshootingFigures Xiv Tables Xvi Introduction Freedom HF Inverter/Charger Shutdown Independent Power SystemPage Features Freedom HF Inverter/Charger unit Materials ListFront Panel Default Settings for the Freedom HF SystemRear Panel Side PanelFreedom Display PanelPage Configuration To adjust the battery type setting Setting Battery Types on the Main UnitTo adjust what is being displayed on the screen Adjusting Display, Alarm, and Charging Current SettingsTo adjust the alarm setting 1Charging Current Guidelines Page Operation Inverter button Display Panel OperationOperating in Shore Power Mode Turning the Inverter Function On and Off Operating in Inverter ModeChecking Battery Status Status LED During Inverter ModeTurning the Audible Alarm on or OFF Checking Output PowerOperating Several Loads at Once Transitioning from Inverter Mode to Shore Power Transitioning from Shore Power to Inverter ModeOperating Limits Power OutputInput Voltage Overload Conditions Inverter LoadsHigh Surge Loads Trouble Loads Over-temperature Conditions1Three-stage Charging Process Battery ChargingFUL Batteries Routine MaintenancePage HF Inverter/Charger during operation TroubleshootingGeneral Troubleshooting Guidelines General Troubleshooting Guidelines Buzz in Audio Equipment Common ProblemsTelevision Reception E01 E08 To reset error codes E10 to E12 2Troubleshooting Reference Troubleshooting ReferenceTroubleshooting Reference Resistive Loads Inverter ApplicationsLong Transfer Times Motor LoadsPage Specifications Freedom HF Electrical Specifications Inverter ModeElectrical Specifications Charge Mode Regulatory Approvals Environmental SpecificationsSystem Specifications Physical SpecificationsInverter Overload Operation Invert Power Derating vs. Ambient Temperature Table A-1Charging Voltage Charger Output Current vs. AC Input VoltagePage Warranty Warranty and Return InformationWA-2 Exclusions Return Material Authorization PolicyDisclaimer ProductOut of Warranty Service Return Procedure806-1840 Information About Your SystemWA-6 975-0390-01-01 IX-1 IndexIX-2 Page Xantrex Technology Inc