Inverter Loads
Inverter Loads
The Freedom HF will operate most AC loads within its power rating of 1000 watts (Freedom HF 1000) or 1800 watts (Freedom HF 1800). However, some appliances and equipment may be difficult to operate, and other appliances may actually be damaged if you try to operate them with the Freedom HF. Please read “High Surge Loads” and “Trouble Loads” carefully.
Overload Conditions
| There are two kinds of overload conditions: |
| • An overload warning and |
| • An overload shutdown. |
Overload | When the Freedom HF’s AC load is approximately 100 W below the |
Warning | overload shutdown limit of ~1000 W (Freedom HF 1000) and ~1800 W |
| (Freedom HF 1800), the audible alarm beeps once every two seconds and |
| the display screen shows a fault code E06. |
Overload | When the Freedom HF’s AC load increases to near ~1100 W (Freedom |
Shutdown | HF 1000) and ~2000 W (Freedom HF 1800), the audible alarm beeps |
| every second and the display screen shows a fault code E03. The Status |
| LED turns solid RED and in 30 seconds, both the unit and the display |
| screen will shut down to prevent damage to the inverter and protect the |
| battery from being |
High Surge Loads
Some induction motors used in freezers, pumps, and other