Studer Innotec XPC 1112 Summary, General Information, Introduction, Mounting and installing

STUDER INNOTEC XP-COMPACT

Summary

1 General Information		3
1.1	OPERATING INSTRUCTIONS	3
1.2	QUALITY AND WARRANTY	3
1.3	WARRANTY DISCLAIMER	3
1.4	LIABILITY DISCLAIMER	3
1.5	PRECAUTIONS	4
1.6	SPECIAL PRECAUTIONS	4

2	Introduction		5
	2.1	PRINCIPLE SCHEMATIC	5
	2.2	DESCRIPTION OF MAIN FUNCTIONS	5
	2.2.1	The inverter	5
	2.2.2	The transfer system	5
	2.2.3	The battery charger	5
	2.2.4 The solar charge controller (optional)		6
	2.2.5	Remote control	6
	2.3	BATTERY CONNECTIONS	6
	2.3.1	Connection in parallel	6
	2.3.2	Connection in serie	6
	2.3.3 Connection in parallel and in serie		7

3 Mounting and installing		7
3.1	INSTALLATION PLACE	7
3.2	FIXING	7
3.2.1	XP-COMPACT	7
3.3	PROTECTION COVER IP23	7
3.4	CONNECTIONS	7
3.4.1 General instructions on connecting		7
3.4.2 Protection cover for the terminals connections		8
3.5	CONNECTING PANEL / FRONT SIDE	8
3.6	CABLING/WIRING	9
3.6.1	Pre-installation settings	9
3.6.2	Connection to battery	9
3.6.3 Connecting the 230Vac-Consumer Appliance (AC OUTPUT)		9
3.6.4 Connecting the 230Vac Input (AC INPUT)		9
3.6.5 Connecting the Solar modules: SOLAR +/- (Only with solar option)		9
3.6.6 Connection to Auxiliary Contact		10
3.6.7 Connection to Temperature Sensor (Temp.)		10

4 Control				10
4.1		DISPLAY AND CONTROL PARAMETERS		10
4.2		DISPLAY AND CONTROL PARAMETERS ON REMOTE CONTROL PANEL (OPTIONAL)		11
4.3		LIGHT EMITTING DIODES (LED)		11
4.4		PUSH BUTTONS		12
4.5		TURNING KNOBS		12
4.6		THE INVERTER		12
	4.6.1 Charge detection system „Standby“			12
4.6.2		Overload		12
4.6.3		Overheating (Over Temp)		12
4.6.4		Battery Condition		13
4.7		THE BATTERY CHARGER		13
4.7.1		Cycle of charge		13
4.7.2		Equalization charging		14
	4.7.3 Default value for battery charger			14
4.7.4		Charging current		14
4.8		THE TRANSFER SYSTEM		14
	4.8.1 Set the transfer voltage threshold			15
	4.8.2 FAST (UPS)- MODE for the Transfer Switch			15
User manual			XP-COMPACT V2.0 E	1