Studer Innotec XPC 1648, XPC 1624, XPC 1112 user manual Maintenance EC Compliance Technical Data

STUDER INNOTEC			XP-COMPACT
	4.8.3 Delayed mode of the Transfer System		15
	4.9	THE SOLAR CHARGE CONTROLLER (OPTION)	15
	4.10	THE MULTIFUNCTIONAL CONTACT	16
	4.11	THE TEMPERATURE SENSOR	16
5	The Remote Control		16
	5.1	REMOTE CONTROL PLUG-IN	16
	5.2	POWER MONITOR	16
	5.3	BATTERY CONDITION:	17
	5.4	FAULT INDICATOR	17
	5.4.1	Overtemp. (10)	17
	5.4.2	Overload (11)	17
	5.4.3	Battery low/high	17
	5.5	DEPORTED ALARM CONTACT AND ON/OFF CONTROL	17
	5.6	MANUAL CONTROL OF THE AUXILIARY CONTACT	17
6	Programming:		17
	6.1	STANDARD SETTING	18
	6.1.1	Battery voltage	18
	6.1.2	Auxiliary contact	18
	6.2	RESET VALUE	18
	6.3	BATTERY VOLTAGES AND ABSORPTION TIME:	18
	6.3.1 Table of voltage and timing threshold		18
	6.3.2 Set the voltage and timing threshold		18
	6.4	PROGRAM THE AUXILIARY CONTACT	19
	6.4.1	Principle	19
	6.4.2 The programming of the Auxiliary Contact is carried out in the following Steps		19
	6.4.3	Example	19
	6.5	DISABLING SOME OF THE XP-COMPACTFUNCTIONS	20
	6.5.1 Diagram of the different mode		20
7	Maintenance		20
8	EC Compliance		20
9	Technical Data		21

User manual XP-COMPACT V2.0 E 2