Studer Innotec XPC 1648, XPC 1624, XPC 1112 user manual Connecting panel / Front side, Solar +

STUDER INNOTEC XP-COMPACT

Connecting must be done by qualified staff. Material such as cable, connectors and distribution boxes, fuses etc. used in the installation must comply with the respective valid low-voltage installa- tion rules and regulations.

3.4.2Protection cover for the terminals con- nections

The protection cover is available in option (Order ref. CFC-01) and avoids to do wrong hazardous contact on the terminals 230Vac. It is mounted with strain relief clamps for the cable.

3.5Connecting panel / Front side

M Caution: Check battery polarity (+/-) before connecting! A wrong connection could damage the system.

BATTERY

L

battery

Equalize Transferdelay

.

openDon'tbefore

disconnectline and

SOLAR

A

16A-250Vac

AC IN

Remote

Temp.

control

sens.

B

C

D

E

F

G

N

N

H

J

AC OUT

N L

K

A	Battery +/-	Battery cable (already installed)
B	SOLAR +/-	Connecting terminal for Solar modules
C	Remote contr.	Connecting terminal for Remote Control RCC-01
D	Equalize	Slide switch for equalization of the Battery
E	Transfer delay	Slide switch for Transfer Delay
F	Temp.	Connecting terminal for Temperature sensor CT-35
G	Aux. Contact	Connecting terminal for Auxiliary Contact
H	AC Input	Connecting terminal for AC-input. Located directly above this
		terminal is the automatic safety cut-out for this terminal.
J	ID Plate	Identification plate with Technical data and Serial number
K	AC Output	Connecting terminal for AC-output
N	16A Protection	16A Protection switch for the Transfer system

User manual XP-COMPACT V2.0 E 8