Studer Innotec XPC 1624 Battery connections, Solar charge controller optional, Remote control

Page 7

STUDER INNOTEC

XP-COMPACT

 

 

technical specification (chap.6). The battery charger is meant for the lead-acid and lead-gel batter- ies. Thanks to the floating charge system the battery can remain continuously connected.

2.2.4The solar charge controller (optional)

With the built-in solar charge controller, the XP-COMPACT is a complete solar-power-center. In a solar installation this controller ensures that the batteries are charged correctly. With the XP- COMPACT, batteries can be charged with a generator and with the solar modules at the same time. The charging of batteries with both energy sources is carried out fully automatically.

2.2.5Remote control

As an option, a remote control can be connected to XP-COMPACT. Extra display and program- ming possibilities are available on the remote control (see Chap.5). The remote control is supplied with a 20m long cable. This cable can go to 40m long. On the remote control output power and charging current are also monitored.

2.3Battery connections

Lead-acid batteries are normally available in blocks of 2V, 6V or 12V. In most cases, to generate the necessary operating voltage and the capacity of the batteries for the XP-COMPACT many bat- teries have to be connected together in parallel and or in series. Following three examples are shown:

2.3.1Connection in parallel

12V

12V

12V

12V

 

 

 

2.3.2Connection in serie

2V

2V

2V

2V

2V

2V

12V

 

 

 

 

 

 

2V

2V

2V

2V

2V

2V

 

 

 

 

 

 

 

 

 

 

 

 

24V

2V

2V

2V

2V

2V

2V

 

 

 

 

 

 

 

 

 

 

 

 

12V

12V

12V

12V

48V

 

 

 

 

User manual

XP-COMPACT V2.0 E

6

Image 7
Contents XP-COMPACT V2.0 E XP-COMPACT XPCIntroduction Mounting and installingSummary General InformationMaintenance EC Compliance Technical Data Operating instructions Quality and WarrantyWarranty Disclaimer General InformationSpecial Precautions PrecautionsIntroduction Principle schematicDescription of main functions Connection in parallel Battery connectionsRemote control Solar charge controller optionalProtection cover IP23 Mounting and installingInstallation place FixingProtection cover for the terminals con- nections Connecting panel / Front sideSolar + Connecting the 230Vac-Consumer Appliance AC Output Cabling/wiringPre-installation settings Connection to batteryDisplay and control parameters Connection to Remote controlConnection to Temperature Sensor Temp ControlMarking LED lit LED blinks Light Emitting Diodes LEDTurning Knobs Push buttonsInverter Battery Condition Battery chargerCycle of charge Equalization charging Transfer systemCharging current Set the transfer voltage threshold Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Solar charge controller optionPower monitor Remote ControlTemperature sensor Remote control plug-inProgramming Battery ConditionFault indicator Remote alarm contact and on/off controlReset value Standard settingBattery voltages and absorption time Principle Program the auxiliary contactExample Disabling some of the XP-COMPACT functions MaintenanceDiagram of the different mode EC ComplianceModel Technical Data