Tekkeon MP1280 manual Troubleshooting

Ultra Power battery which more than doubles your work or play time on your iPhone 4.

1.With the iPhone 4 in the battery case, gently pull the battery module from the control module and iPhone 4.

2.Slide the new battery module down over your iPhone 4 until it snaps into place.

Note: You must charge your extra battery before swapping it while on the go.

Troubleshooting

If myPower for iPhone 4 does not power iPhone 4, take these steps:

1.Confirm that the On/Off switch is in the On position (to the right).

2.With the iPhone 4 inserted in the battery case, check the Capacity Indicator to verify that myPower for iPhone 4 is charged (capacity indicator is blue).

3.Verify that your iPhone 4 is properly docked into the 30-pin connector at the bottom of the battery case and the battery module is snapped securely into the control module.