Harbor Freight Tools 67853 manual Using the Compressor, Operation, Before starting the Compressor

Page 10

Operation

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Using the Compressor

Inspect Compressor, engine, pump and equipment looking for damaged, loose, and missing parts before set up and starting. If any problems are found, do not use equipment until fixed properly.

Note: At the beginning of the day’s first use of the Air Compressor, check for air leaks by applying soapy water to connections while the Air Compressor is pumping and after pressure cut-out. Look for air bubbles. If air bubbles are present at connections, tighten connections. Do not use the air compressor unless all connections are air tight. The extra air leaking out will cause the compressor to operate too often, increasing wear on the compressor.

Before starting the Compressor:

a.Follow the Set Up Instructions in the equipment manual to prepare the equipment.

b.Follow the Set Up Instructions in the Engine manual to prepare the engine.

c.Inspect all components of the setup. Make sure all nuts and bolts are tight.

d.Fill the Engine with the proper amount and type of both fuel and oil.

e.Fill the Compressor Pump with compressor oil following the Maintenance Instructions in this manual.

To Start and Use the Compressor

1. Close the Drain Valve (137) by turning the lever up so that it is perpendicular to the valve.

1

2. Close the in-line Shutoff Valve between the compressor and

2

 

the air hose.

 

3. Open the Pilot Valve by rotating it to a vertical position.

3

4. Open the Fuel Valve.

4

Page 8

For technical questions, please call 1-800-444 3353.

Item 67853

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Using an engine indoors can Kill YOU MinutesPage Safety Warnings Symbol DefinitionsSet up Precautions Symbol Property or StatementCarbon Monoxide Hazard Using an engine indoors can Kill Engine Precautions Operating PrecautionsYOU in Minutes Service Precautions Air Compressor Safety WarningsEngine Controls Mounting to a Truck bed AssemblySet up Break-In CompressorSpray Gun Portable Setup Description FunctionDescription Function Before starting the Compressor Using the CompressorOperation To Start and Use the CompressorFor Manual Start StartMaintenance Break-in Period For technical questions, please call 1-800-444 Maintenance Maintenance ProceduresCompressor Pump Oil Maintenance Adding OilChanging Oil Air Filter MaintenanceAdjusting Belt Tension Draining Moisture from the TankTroubleshooting Problem Possible Causes Likely SolutionsPlease Read the Following Carefully Pump Parts List Part Description QtyPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Specifications Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Refueling Do not OverfillEngine Switch Air Filter12′ Battery Setup InstructionsCable Gauge Maximum To Prevent Serious InjuryStarting the Engine Pre-Start ChecksInjury from Fire Turn the Engine Switch on Manual StartStopping the Engine Break-in PeriodTurn the Engine Switch to Start Electric Start if equippedOFF To Prevent Serious Injury from Accidental Starting Cleaning, Maintenance, and Lubrication ScheduleService To Prevent Serious Injury from Equipment FailureCleaning Air Filter Element MaintenanceEngine Oil Change Storage Recommended Spark PlugsDo not use gasoline with more than TroubleshootingProblem Possible Causes Probable Solutions 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionManufacturer’s Warranty Coverage Limited 90 Day WarrantyEmission Control System Warranty WarrantiesOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram List and Diagram 68136 346cc Parts68306 420cc Parts List and Diagram Part Description Qty68306 420cc Parts Item 68120 / 68121 212cc Mounting Hole DiagramsItem 68136 346cc and Item 68306 420cc Power Take-Off Diagrams 16-24UNFMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents