Harbor Freight Tools 67853 manual Off

Page 35

5.Allow the Engine to run for several seconds. Then, if the Choke lever is in the CHOKE position, move the Choke Lever very slowly to its RUN position.

NOTE: Moving the Choke Lever too fast could stall the engine.

5

CHOKE RUN

IMPORTANT: Allow the engine to run at no load for five minutes with no load after each start‑up so that the engine can stabilize.

6.Adjust the Throttle as needed.

7.Break-in Period:

a.Breaking-in the engine will help to ensure proper equipment and engine operation.

b.The operational break-in period will last about 3 hours of use. During this period:

•Do not apply a heavy load to the equipment.

•Do not operate the engine at its maximum speed.

c.The maintenance break-in period will last about 20 hours of use. After this period:

•Change the engine oil.

Under normal operating conditions subsequent maintenance follows the schedule explained in the MAINTENANCE AND SERVICING section.

Stopping the Engine

OFF

1. To stop the engine in an emergency, turn the Engine Switch off.

2. Under normal conditions, use the following procedure:

a.Slide the Throttle or Speed Control Lever to SLOW (the “turtle”).

b. Turn the Engine Switch off. c. Close the Fuel Valve.

Page 12

For Engine technical questions, please call 1-800-520-0882.

Horizontal Engines

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Minutes Using an engine indoors can Kill YOUPage Symbol Property or Statement Symbol DefinitionsSet up Precautions Safety WarningsYOU in Minutes Engine Precautions Operating PrecautionsCarbon Monoxide Hazard Using an engine indoors can Kill Air Compressor Safety Warnings Service PrecautionsEngine Controls Break-In Compressor AssemblySet up Mounting to a Truck bedDescription Function Spray Gun Portable SetupDescription Function To Start and Use the Compressor Using the CompressorOperation Before starting the CompressorStart For Manual StartMaintenance Break-in Period For technical questions, please call 1-800-444 Adding Oil Maintenance ProceduresCompressor Pump Oil Maintenance MaintenanceDraining Moisture from the Tank Air Filter MaintenanceAdjusting Belt Tension Changing OilProblem Possible Causes Likely Solutions TroubleshootingPlease Read the Following Carefully Part Description Qty Pump Parts ListPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Specifications212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Do not Overfill RefuelingAir Filter Engine SwitchTo Prevent Serious Injury Battery Setup InstructionsCable Gauge Maximum 12′Injury from Fire Pre-Start ChecksStarting the Engine Manual Start Turn the Engine Switch onBreak-in Period Stopping the EngineElectric Start if equipped Turn the Engine Switch to StartOFF To Prevent Serious Injury from Equipment Failure Cleaning, Maintenance, and Lubrication ScheduleService To Prevent Serious Injury from Accidental StartingEngine Oil Change Air Filter Element MaintenanceCleaning Recommended Spark Plugs Storage10% ethanol E15, E20, E85, etc TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startWarranties Limited 90 Day WarrantyEmission Control System Warranty Manufacturer’s Warranty CoverageOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram 68136 346cc Parts List and DiagramPart Description Qty 68306 420cc Parts List and Diagram68306 420cc Parts Item 68136 346cc and Item 68306 420cc Mounting Hole DiagramsItem 68120 / 68121 212cc 16-24UNF Power Take-Off DiagramsMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents