Harbor Freight Tools 67853 manual Engine Precautions Operating Precautions, YOU in Minutes

Page 4

4.Set up and use only on a flat, level, well‑ventilated surface.

5.Use only lubricants and fuel recommended in the engine manual or in the Specifications chart of this manual.

6.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

Engine Precautions

Follow engine precautions and instructions in the included engine instruction manual.

Operating Precautions

1.Carbon Monoxide Hazard

Using an engine indoors CAN KILL

YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows, doors, and vents.

2.Keep children away from the equipment, especially while it is operating.

3.Fire Hazard! Do not fill gas tank while Compressor engine is running. Do not operate if gasoline has been spilled. Clean spilled gasoline before starting engine.

Do not operate near pilot light or open flame.

4.Do not touch Compressor engine during use. Let engine cool down after use.

5.Never store fuel or other flammable materials near the Compressor engine.

6.Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity when transporting the Compressor.

7.Secure the Compressor on transport vehicles to prevent the tool from rolling, slipping, and tilting.

8.Industrial applications must follow OSHA requirements.

9.Do not leave the equipment unattended when it is running. Turn off the equipment (and remove safety keys, if available) before leaving the work area.

10.Wear ANSI-approved safety glasses, hearing protection, and NIOSH-approved dust mask/respirator under a full face shield along with steel-toed work boots during use.

11.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near the engine’s magneto or recoil starter.

12.Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

13.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

14.Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

15.Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.

16.Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

17.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

18.Do not cover the engine or equipment during operation.

19.Keep the equipment, engine, and surrounding area clean at all times.

20.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation.

21.Do not operate the equipment with known leaks in the engine’s fuel system.

22.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

23.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

Page 2

For technical questions, please call 1-800-444 3353.

Item 67853

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Using an engine indoors can Kill YOU MinutesPage Symbol Definitions Set up PrecautionsSafety Warnings Symbol Property or StatementCarbon Monoxide Hazard Using an engine indoors can Kill Engine Precautions Operating PrecautionsYOU in Minutes Service Precautions Air Compressor Safety WarningsEngine Controls Assembly Set upMounting to a Truck bed Break-In CompressorSpray Gun Portable Setup Description FunctionDescription Function Using the Compressor OperationBefore starting the Compressor To Start and Use the CompressorFor Manual Start StartMaintenance Break-in Period For technical questions, please call 1-800-444 Maintenance Procedures Compressor Pump Oil MaintenanceMaintenance Adding OilAir Filter Maintenance Adjusting Belt TensionChanging Oil Draining Moisture from the TankTroubleshooting Problem Possible Causes Likely SolutionsPlease Read the Following Carefully Pump Parts List Part Description QtyPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Specifications Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Refueling Do not OverfillEngine Switch Air FilterBattery Setup Instructions Cable Gauge Maximum12′ To Prevent Serious InjuryStarting the Engine Pre-Start ChecksInjury from Fire Turn the Engine Switch on Manual StartStopping the Engine Break-in PeriodTurn the Engine Switch to Start Electric Start if equippedOFF Cleaning, Maintenance, and Lubrication Schedule ServiceTo Prevent Serious Injury from Accidental Starting To Prevent Serious Injury from Equipment FailureCleaning Air Filter Element MaintenanceEngine Oil Change Storage Recommended Spark PlugsTroubleshooting Problem Possible Causes Probable SolutionsDo not use gasoline with more than 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionLimited 90 Day Warranty Emission Control System WarrantyManufacturer’s Warranty Coverage WarrantiesOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram List and Diagram 68136 346cc Parts68306 420cc Parts List and Diagram Part Description Qty68306 420cc Parts Item 68120 / 68121 212cc Mounting Hole DiagramsItem 68136 346cc and Item 68306 420cc Power Take-Off Diagrams 16-24UNFMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents