Harbor Freight Tools 67853 manual Maintenance Break-in Period

Page 12

9. When the Gas Engine is started and running, the

compressor Pump starts compressing air into the Air Tank.

 

Open the in-line Shutoff Valve and adjust the Pressure

 

Regulator (sold separately) so that the air output is enough

 

to properly power the tool, but the output will not exceed

9

the tool’s maximum air pressure at any time. Turn the knob

 

clockwise to increase the pressure and counterclockwise

 

to decrease pressure. Adjust the pressure gradually, while

 

checking the air output gauge to set the pressure.

 

IMPORTANT: Allow the engine to run for five minutes with no load after each start‑up so that the engine can stabilize.

Maintenance Break-in Period:

Breaking-in the engine will help to ensure proper equipment and engine operation. The maintenance break-in period will last about 20 hours of use. After this period, change the engine oil.

Under normal operating conditions, subsequent maintenance follows the schedule explained in the Maintenance and Servicing section.

Note: When maximum tank pressure is reached, the compressor automatically disengages, and the engine RPM drops down to idle speed. The engine remains at idle until Air Tank pressure falls to a preset level. The Gas Engine will then accelerate and air pressure once again begins to build up in the Air Tank.

Note: As long as the engine is running, the operation of the Air Compressor is automatic, controlled by an internal pressure switch.

IMPORTANT: The internal pressure switch is not user adjustable; do not make changes to the air pressure settings of the internal pressure switch. Any change to the automatic pressure levels may cause excess pressure to accumulate, causing a hazardous situation.

Note: Depressurization - If it is necessary to quickly depressurize the Compressor, turn OFF the engine. Then, pull on the ring on the tank Safety Valve to release stored air pressure.

10. Use the air tool as needed.

10

11.After the job is complete, turn OFF the engine.

To stop the engine in an emergency, turn the Engine Switch off. Under normal conditions, use the following procedure:

a.Turn the Engine Switch off.

b.Close the Fuel Valve.

ONOFF

OFF START

11

Page 10

For technical questions, please call 1-800-444 3353.

Item 67853

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Using an engine indoors can Kill YOU MinutesPage Symbol Definitions Set up PrecautionsSafety Warnings Symbol Property or StatementEngine Precautions Operating Precautions Carbon Monoxide Hazard Using an engine indoors can KillYOU in Minutes Service Precautions Air Compressor Safety WarningsEngine Controls Assembly Set upMounting to a Truck bed Break-In CompressorSpray Gun Portable Setup Description FunctionDescription Function Using the Compressor OperationBefore starting the Compressor To Start and Use the CompressorFor Manual Start StartMaintenance Break-in Period For technical questions, please call 1-800-444 Maintenance Procedures Compressor Pump Oil MaintenanceMaintenance Adding OilAir Filter Maintenance Adjusting Belt TensionChanging Oil Draining Moisture from the TankTroubleshooting Problem Possible Causes Likely SolutionsPlease Read the Following Carefully Pump Parts List Part Description QtyPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Specifications Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Refueling Do not OverfillEngine Switch Air FilterBattery Setup Instructions Cable Gauge Maximum12′ To Prevent Serious InjuryPre-Start Checks Starting the EngineInjury from Fire Turn the Engine Switch on Manual StartStopping the Engine Break-in PeriodTurn the Engine Switch to Start Electric Start if equippedOFF Cleaning, Maintenance, and Lubrication Schedule ServiceTo Prevent Serious Injury from Accidental Starting To Prevent Serious Injury from Equipment FailureAir Filter Element Maintenance CleaningEngine Oil Change Storage Recommended Spark PlugsTroubleshooting Problem Possible Causes Probable SolutionsDo not use gasoline with more than 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionLimited 90 Day Warranty Emission Control System WarrantyManufacturer’s Warranty Coverage WarrantiesOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram List and Diagram 68136 346cc Parts68306 420cc Parts List and Diagram Part Description Qty68306 420cc Parts Mounting Hole Diagrams Item 68120 / 68121 212ccItem 68136 346cc and Item 68306 420cc Power Take-Off Diagrams 16-24UNFMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents