Harbor Freight Tools 67853 manual Use only accessories that are recommended by Harbor

Page 27

Set up Precautions

1.Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extinguishers nearby.

3.Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

4.Set up and use only on a flat, level, well‑ventilated surface.

5.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

6.Use only lubricants and fuel recommended in the Specifications chart of this manual.

Operating Precautions

1.CARBON MONOXIDE HAZARD Using an engine indoors CAN KILL

YOU IN MINUTES.

Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell.

NEVER use inside a home or garage, EVEN IF doors and windows are open.

Only use OUTSIDE and far away from windows, doors, and vents.

2.Keep children away from the equipment, especially while it is operating.

3.Keep all spectators at least six feet from the Engine during operation.

4.Fire Hazard! Do not fill gas tank while engine is running. Do not operate if gasoline has been spilled. Clean spilled gasoline before starting engine.

Do not operate near pilot light or open flame.

5.Do not touch engine during use. Let engine cool down after use.

6.Never store fuel or other flammable materials near the engine.

7.Only use a suitable means of transport and lifting devices with sufficient weight bearing capacity when transporting the Engine.

8.Secure the Engine on transport vehicles to prevent the tool from rolling, slipping, and tilting.

9.Industrial applications must follow OSHA requirements.

10.Do not leave the equipment unattended when it is running. Turn off the equipment (and remove safety keys, if available) before leaving the work area.

11.Engine can produce high noise levels. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Always wear ear protection when operating or working around the gas engine while it is operating.

12.Wear ANSI-approved safety glasses, hearing protection, and NIOSH-approved dust mask/ respirator under a full face shield along with steel-toed work boots during use.

13.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure. Caution is necessary when near

the engine’s magneto or recoil starter.

14.Use only accessories that are recommended by Harbor

Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

15.Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes.

16.Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.

17.Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.

18.Use this equipment with both hands

only. Using equipment with only one hand can easily result in loss of control.

19.Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

20.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

21.Do not cover the engine or equipment during operation.

22.Keep the equipment, engine, and surrounding area clean at all times.

Page 4

For Engine technical questions, please call 1-800-520-0882.

Horizontal Engines

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Minutes Using an engine indoors can Kill YOUPage Symbol Property or Statement Symbol DefinitionsSet up Precautions Safety WarningsEngine Precautions Operating Precautions Carbon Monoxide Hazard Using an engine indoors can KillYOU in Minutes Air Compressor Safety Warnings Service PrecautionsEngine Controls Break-In Compressor AssemblySet up Mounting to a Truck bedDescription Function Spray Gun Portable SetupDescription Function To Start and Use the Compressor Using the CompressorOperation Before starting the CompressorStart For Manual StartMaintenance Break-in Period For technical questions, please call 1-800-444 Adding Oil Maintenance ProceduresCompressor Pump Oil Maintenance MaintenanceDraining Moisture from the Tank Air Filter MaintenanceAdjusting Belt Tension Changing OilProblem Possible Causes Likely Solutions TroubleshootingPlease Read the Following Carefully Part Description Qty Pump Parts ListPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Specifications212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Do not Overfill RefuelingAir Filter Engine SwitchTo Prevent Serious Injury Battery Setup InstructionsCable Gauge Maximum 12′Pre-Start Checks Starting the EngineInjury from Fire Manual Start Turn the Engine Switch onBreak-in Period Stopping the EngineElectric Start if equipped Turn the Engine Switch to StartOFF To Prevent Serious Injury from Equipment Failure Cleaning, Maintenance, and Lubrication ScheduleService To Prevent Serious Injury from Accidental StartingAir Filter Element Maintenance CleaningEngine Oil Change Recommended Spark Plugs Storage10% ethanol E15, E20, E85, etc TroubleshootingProblem Possible Causes Probable Solutions Do not use gasoline with more thanCompression Related section Use Engine will not startWarranties Limited 90 Day WarrantyEmission Control System Warranty Manufacturer’s Warranty CoverageOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram 68136 346cc Parts List and DiagramPart Description Qty 68306 420cc Parts List and Diagram68306 420cc Parts Mounting Hole Diagrams Item 68120 / 68121 212ccItem 68136 346cc and Item 68306 420cc 16-24UNF Power Take-Off DiagramsMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents