Harbor Freight Tools 67853 manual Refueling, Do not Overfill

Page 28

23.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed.

Use of the equipment for operations different from those intended could result in a hazardous situation.

24.Do not operate the equipment with known leaks in the engine’s fuel system.

25.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)

26.When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

27.Keep hands and feet away from moving parts. Do not reach over or across equipment while operating.

28.Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment.

29.Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended.

Service Precautions

1.Before service, maintenance, or cleaning:

a.Turn the engine switch to its “OFF” position.

b.Allow the engine to completely cool.

c.Then, remove the spark plug cap from the spark plug.

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards.

3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed.

4.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

5.Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

7.Store equipment out of the reach of children.

8.Follow scheduled engine and equipment maintenance.

Refueling:

1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

2.Do not refill the fuel tank while the engine is running or hot.

3.TO PREVENT FUEL LEAKAGE AND FIRE HAZARD, do not fill fuel above the bottom of fuel strainer for the 68121, 212cc engine.

68121 Max Fuel

DO NOT OVERFILL!

4.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

5.Refuel in a well-ventilated area only.

6.Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air.

SAVE THESE

INSTRUCTIONS.

Horizontal Engines

For Engine technical questions, please call 1-800-520-0882.

Page 5

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Using an engine indoors can Kill YOU MinutesPage Symbol Definitions Set up PrecautionsSafety Warnings Symbol Property or StatementCarbon Monoxide Hazard Using an engine indoors can Kill Engine Precautions Operating PrecautionsYOU in Minutes Service Precautions Air Compressor Safety WarningsEngine Controls Assembly Set upMounting to a Truck bed Break-In CompressorSpray Gun Portable Setup Description FunctionDescription Function Using the Compressor OperationBefore starting the Compressor To Start and Use the CompressorFor Manual Start StartMaintenance Break-in Period For technical questions, please call 1-800-444 Maintenance Procedures Compressor Pump Oil MaintenanceMaintenance Adding OilAir Filter Maintenance Adjusting Belt TensionChanging Oil Draining Moisture from the TankTroubleshooting Problem Possible Causes Likely SolutionsPlease Read the Following Carefully Pump Parts List Part Description QtyPump Assembly Diagram Tank Parts List Tank Assembly Diagram Limited 90 Day Warranty Specifications Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800212, 346 and 420 cc Horizontal Engines Description 68120 68136 68306 Eye Injury. Wear ANSI-approved Use only accessories that are recommended by Harbor Refueling Do not OverfillEngine Switch Air FilterBattery Setup Instructions Cable Gauge Maximum12′ To Prevent Serious InjuryStarting the Engine Pre-Start ChecksInjury from Fire Turn the Engine Switch on Manual StartStopping the Engine Break-in PeriodTurn the Engine Switch to Start Electric Start if equippedOFF Cleaning, Maintenance, and Lubrication Schedule ServiceTo Prevent Serious Injury from Accidental Starting To Prevent Serious Injury from Equipment FailureCleaning Air Filter Element MaintenanceEngine Oil Change Storage Recommended Spark PlugsTroubleshooting Problem Possible Causes Probable SolutionsDo not use gasoline with more than 10% ethanol E15, E20, E85, etcUse Engine will not start Compression Related sectionLimited 90 Day Warranty Emission Control System WarrantyManufacturer’s Warranty Coverage WarrantiesOwner’s Warranty Responsibilities 68120 212cc Parts List and Diagram 68120 212cc Parts List and Diagram 68121 212cc Parts List and Diagram 102 68136 346cc Parts List and Diagram List and Diagram 68136 346cc Parts68306 420cc Parts List and Diagram Part Description Qty68306 420cc Parts Item 68120 / 68121 212cc Mounting Hole DiagramsItem 68136 346cc and Item 68306 420cc Power Take-Off Diagrams 16-24UNFMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

67853 specifications

Harbor Freight Tools is widely recognized for providing a variety of high-quality tools at competitive prices, and the model 67853 is no exception. This tool combines functionality, durability, and affordability, making it a popular choice among both amateur and professional users.

The Harbor Freight Tools 67853 is a 20" tool chest that stands out for its robust construction and ample storage capabilities. This tool chest features double-walled steel construction, ensuring that it can withstand the rigors of a busy workshop or garage. Its powder-coated finish not only enhances its aesthetic appeal but also provides added protection against rust and corrosion, ensuring that the chest maintains its integrity over time.

One of the key features of the 67853 is the abundance of storage space it offers. The chest is designed with multiple drawers that provide easy access to tools and supplies. Each drawer is equipped with ball-bearing slides that ensure smooth opening and closing, minimizing the risk of wear and tear over time. The drawers are designed to hold a significant amount of weight, allowing users to store a variety of tools, from hand tools to power equipment.

The organization is made easy with the inclusion of padded drawer liners that help keep tools in place, preventing them from sliding around during opening and closing. This thoughtful design feature is particularly beneficial when working in a fast-paced environment where efficiency is key. Furthermore, the top section of the chest is perfect for displaying frequently used tools or storing small items for easy access.

Safety and security are also prioritized with the Harbor Freight Tools 67853. The chest comes equipped with a central locking system that secures all drawers simultaneously, protecting valuable tools from theft and ensuring that everything is kept in its designated place. This added layer of security is vital for professionals who rely on their tools for daily operations.

Another notable aspect of the 67853 is its mobility. The chest is fitted with sturdy casters, allowing users to easily move it around the workshop or garage as needed. This mobility is coupled with a solid locking mechanism that keeps the chest stable when in use, ensuring it won't roll away unexpectedly.

In terms of aesthetics, the Harbor Freight Tools 67853 features a sleek design that will complement any workspace. The glossy finish and minimalist lines provide a professional look that is appealing to users across all fields.

Overall, the Harbor Freight Tools 67853 offers excellent value for users seeking a reliable and stylish tool chest that fulfills various storage needs. Its durable construction, ample storage, and thoughtful design make it a top choice in the market, catering to both hobbyists and seasoned professionals alike.
Top Page Image Contents