9.Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit into place. The unit should slide in and out of the rack easily. Refer to Figure 9.
WARNING: When sliding out the Endura workstation, be careful not to let the unit fall out of the rack.
Figure 9. Mounting the Endura Workstation into the Rack
10. After the unit is in place, tighten the two thumbscrews to secure the unit to the rack.
THUMBSCREW 
THUMBSCREW
Figure 10. Tightening the Thumbscrews
14 |