Before You Begin, Parts List | Pelco C1619M-I specification

Before You Begin

Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network administrator when planning and installing Endura components.

You will also need the following:

•Pelco-approved Endura certification

•Access to an Endura network

–that is an active, gigabit Ethernet network that supports the full Internet Protocol suite,

–that is configured with at least one Endura video recorder,

–that is configured with at least one SM5000 system manager

•One or more monitors (1280 x 1024 VGA or DVI)

•Phillips screwdriver (if mounting the unit into a rack)

•Cat5e (or better) network cable

PARTS LIST

Qty Description

1Pelco Endura workstation with WS5000 advanced system software installed

1Standard PC USB keyboard

1Standard USB mouse

1Rack-mounting kit:

2Chassis mounting brackets with handles and thumb screws

8Screws, 10-32 x 0.25-inch, Phillips, pan head (4 for each bracket)

2Adjustable support rail sets (each set includes 1 front-mounting rail and 1 rear-mounting rail)

6 Screws, 8-32 x 0.375-inch, Phillips, truss head

4 Screws, 10-32 x 0.5-inch, Phillips, flat head (2 for each front-mounting rail) 4 Screws, 10-32 x 0.75-inch, Phillips, pan head (2 for each rear-mounting rail)

10Cage nuts (for use with square-hole racks)

2 DVI-to-VGA video adapter

3 Power cables (1 USA standard, 1 European standard, and 1 UK standard)

2Keys

3Product identification labels (attached to unit)

1 Endura workstation Installation manual

1 WS5000 Operation manual

1 Endura workstation Quick Start Guide

1 Important Safety Instructions

1 Endura Installation and Programming Checklist

1 Resource CD

1 Recovery DVD

1 Nero® installation CD

1 Microsoft® Windows®XP Professional CD

C1619M-I (11/07)