Updating the WS5000 Advanced System Software
The WS5000 advanced system software is updated frequently as Pelco continues to refine and enhance the system, and the latest software might not be available at the time Endura workstation is shipped. It is therefore recommended that you visit the Certified Partner Portal at the Pelco Web site (www.pelco.com) periodically to confirm that the unit contains the latest version of the software. After you download any update, follow the instructions below to install it on the unit.
INSTALLING THE APPLICATION
WARNING: Do not use the Add/Remove Programs feature of Microsoft Windows to remove an existing version of the WS5000. The updated application depends on components and settings that are present in the existing version. The installation program will remove the existing software as the newer version is installed.
1.Close the WS5000 if it is running.
2.In Windows Explorer, locate the folder where you downloaded the updated version of the WS5000 and
Figure 14. Locating and Starting the Installation Program
Figure 15. Installation Welcome Screen
3. Follow the instructions on the installation screens to install the application.
18 |