Panasonic manual XxxxxFP2/FP2SHXxxxxxxx, XxxxxSpecificationsXxxxxxxx,  Power supply units

XxxxxFP2/FP2SHXxxxxxxx

XxxxxSpecificationsXxxxxxxx

CPU units

			FP2 CPU unit		FP2SH CPU unit
	Item		FP2-C1
			FP2-C1D	FP2-C2		FP2-C2P	FP2-C3P
			FP2-C1SL
Operation speed	Basic		0.35∝s or more		0.03∝s or more
	High-level		0.93∝s or more		0.06∝s or more
Program capacity	Built-in RAM		16k steps	60k steps			120k steps
	With expansion		32k steps	Not available			Not available
	No expansion	Conventional type	Max. 768 points		Max. 768 points
		H type	Max. 512 points		Max. 512 points
Number of I/O points	With expansion	Conventional type	Max. 1600 points		Max. 1600 points
		H type	Max. 2048 points		Max. 2048 points
	With remote I/O		Max. 2048 points		Max. 8192 points
	Internal relay		4048 points		14,192 points
	Data register		6000 words		10,240 words
Operation memory	File register		0 to 143,333 words		32,765 words x 3 banks
			(w/expansion 0 to 30,717 words)
	Link register		256 words			8448 words
Optional memory			F-ROM/EP-ROM	F-ROM/EP-ROM		Small PC card (F-ROM/S-RAM)
Comment memory			Optional memory unit			Available
Clock/Calendar function			Optional memory unit			Available

Power supply units

	Item	FP2-PSA1		FP2-PSA2	FP2-PSA3	FP2-PSD2
	Rated voltage	100V - 120VAC		200V - 240V	100V - 240VAC	24VDC
	Current consumption	0.4A or less (at 100VAC)		0.2A or less (at 200VAC)	0.7A or less (at 100VAC) 0.4A or less (at 200VAC)	2.5A or less
Input	Surge current	40A or less (55°C)			30A or less (25°C)	10A or less
	Rated frequency			47Hz ~ 63Hz		−
	Operating	85 to 132VAC		170 to 264VAC	85 to 264VAC	20.4 to 31.2VDC note)
Output	Voltage range		2.5A max.		5A max.
Alarm contact capacity				30VDC 1A
Alarm contact operation				When the ALARM LED of CPU unit is lit
Alarm contact type				1c contact
Leakage current				Between input and ground terminals, 0.75mA or less
Breakdown voltage				1500VAC for 1 minute (between input and ground terminals)
Insulation resistance				100 MΩ 500VDC (between input and ground terminals)
Guaranteed lifetime				20,000 hours at 55°C
Overcurrent protection function				Built-in overcurrent protection
Fuse				Built-in type
Terminal screw					M3
Module size		1 modul		1 modul	2 module	2 module

Note: Allowable voltage fluctuation range after startup for the FP2-PSD2 is -35% to +30%. At startup, apply -15% to + 30% the rated voltage for 100ms or more.

18 08/2007