Panasonic FP2 Analog Control, Accurate Process Control,  Analog control,  Analog input units

Analog Control

Accurate Process Control

Analog control

Multi-range control of a variety of equipment is possible. The units can be directly connected with thermocouples and resistance temperature detectors

Support voltage/current/temperature sensor ranges

The analog input unit supports voltage, current, and temperature sensors. The analog output unit supports voltage or current output.

Different voltage/current ranges can be controlled concurrently.

Equipped with multiple channels

The input unit has eight channels, and the output unit has four. Space-saving multiple-channel control is possible.

High-speed conversion at 500ms by each channel

The speed of voltage and current input/output conversion can reach as high as 500ms.

I/O refresh system

Since input/output data is allocated to the I/O memory, complicated programming is not necessary.

Configuration

Current input

Laser analog sensor

Current input

Pressure sensor

Analog input unit

Analog output unit

Voltage

output Inverter

(speed command)

Analog input units

Three types of analog input units are available to meet a wide variety of customer needs.

High-speed, high-accuracy, multiple-input unit with 8 isolated channels

Industry‘s fastest level

High-speed achieved by highly reliable isolation among channels
Temperature conversion:	20ms/ch
Voltage conversion:	5ms/ch
(Without insulation setting:	500ms/ch)

Industry‘s top level
High-accuracy conversion
Voltage: ±0.1% (25°C)
Temperature: ±0.3% (0 to 55°C)
Multiple inputs
A single unit supports inputs of	FP2-AD8X
thermocouple, RTD, and voltage data*1.

For users who require faster and more accurate temperature control.

For users who require multiple isolated input channels or who want to reduce the cost per channel.

For users who want to input tempera- ture and voltage (current) data through a single unit.

*1: Current inputs can be converted into voltage in- puts by attaching the supplied external resistor to the input terminal section.

			 Analog output unit
8 inputs unit solely for		8 low costs inputs solely	Supports multiple channels.
RTDs (Pt100/Pt1000)		for voltage/current data	(Four channels per unit).
High-speed, high-accuracy		High-speed, high-accuracy	High-speed, high-accuracy
Conversion speed: 20ms/ch		Low cost unit for input of voltage/	Number of outputs: 4
Conversion accuracy: ±0.3%		current data that indicates mea­	Conversion speed: 500ms/ch
(0 to 55°C)		surements of pressure, flow rate,	Overall accuracy: ±1.0% FS
For users who input RTD data only		fluid volume, speed, etc.	or less
			(0 to 55°C)
and require more affordable type.
FP2-RTD		FP2-AD8VI	FP2-DA4
	08/2007