Porter-Cable RS830 instruction manual Accessories PARTS, Service or Warranty Assistance

Page 30

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

Printed in U.S.A.

30

Image 30
Contents Professional Radial Arm Saw General Safety Rules Additional Safety Rules for Radial ARM Saws Avoid Kickback byGrounding Instructions Power ConnectionsMotor Specifications Qualified Electrician Check the ReceptacleChanging Voltage Extension CordsUnpacking and Cleaning Operating InstructionsRadial ARM SAW Parts Table Board Parts 811 912Assembly Legs to SAW BaseWrench Hook to SAW Base Disconnect Machine from Power Source Removing Blade and Blade Guard from SAWTable Supports Page HS a Adjusting Checking SAW Blade Travel Square to Fence Disconnect Machine from Power SourceTable Board Clamps and Table Boards Page Checking and Adjusting SAW Blade Square To Table Removing Heeling in SAW Blade CUTAdjusting IN/OUT RIP Scale FJ aAssembling Blade and Blade Guard to Machine Tongue on Guard Seats Into Groove of CUTTING-HEADCutting Into Table Boards Fastening SAW to the FloorLocking Switch OFF Position Adjusting Ball Bearings Against TrackStarting and Stoping Radial ARM SAW Adjusting Tension on Elevating Column Changing Position of Track ARM Clamping HandleChanging Position of Bevel Clamp Handle Changing Position of Yoke Clamp HandleTable SURFACE, Raise Track ARM Adjusting Splitter and ANTI-KICKBACK Fingers Positive Stop Yoke IndexPositive Stop Bevel Index Explanation of Operating Controls CB KAuxiliary Table Board Facing OperationsOUT-RIPPING Compound Miter CuttingRipping IN-RIPPINGMaintenance Overload ProtectionPush Stick Constructing a Push StickPage Accessories PARTS, Service or Warranty Assistance