Powermatic PM1800 operating instructions Replacement Parts, Trouble Probable Cause Remedy

Trouble	Probable Cause	Remedy
		Double check to confirm all electrical
Machine will not	Miswiring of the unit.	connections are correct. Refer to
start/restart or		wiring diagram on page 47 to make
repeatedly trips		any needed corrections.
circuit breaker or
blows fuses.		If the start/stop switch is suspect, you
(continued)
		have two options: Have a qualified
	Switch failure.	electrician test the switch for function,
		or purchase a new start/stop switch
		and establish if that was the problem
		on change-out.
Band Saw does not	Extension cord too light or too long.	Replace with adequate size and
come up to speed.		length cord.
	Low current.	Contact a qualified electrician.

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

35