Oregon 613GC manual Technical Specifications

613GC OPERATOR’S MANUAL

TECHNICAL SPECIFICATIONS

Engine Type	2-stroke Single Cylinder Air Cooled
Displacement	4.88 cu-in (80cc)
Horsepower	5.6 HP (4.6 kw) @ 9,000 RPM
Torque	37.2 in-lbs (4.2 Nm)
Engine Speed	12,000 +/- 500 rpm
	2,800-3,200 rpm idle
Diamond Chain Speed	In cut = 4,000 sfm
	No load = 5,300 sfm
Weight	20 lbs (9.1 kg) with guide bar and diamond chain
Cut Depth	Up to 12 inches (30.5cm)
	10 inches square (25.4cm)
	18 inches (46cm) length
Dimensions	11.5 inches (29cm) height
	10 inches (25cm) width
Air Filter	Washable dry nylon
Carburetor	Walbro WJ85B, throttle shaft sealed,
	pressure compensating
Starter	Dust and water shielded
Ignition	Special water resistant electronic ignition
Clutch	Three-weight, single spring
Fuel ratio	25:1 gasoline-to-oil
Fuel Capacity	34 oz (1 Liter)
	15-18 minutes run time per tank
Water Supply	Minimum 20psi (1.5 bar)
Noise Level	100dB at 3 ft (1m)
Vibration Level	10.5 m/s2 (front handle)
Engine Break-in Period	One tank, without cutting, cycling throttle
Spark Plug	Champion CJ7Y or Bosch BWS7F

8