Grizzly G0716 owner manual Inventory Figure Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory: (Figure 3)		Qty
A.	Drum Sander Assembly (Not Shown)	.........	1
B.	Left/Right Long Top Braces 23⁜1⁄8"		2
C.	Wheels 4"		2
D.	Legs		4
E.	Long Bottom Braces 20⁜1⁄4"		2
F.	Elevation Handwheel Handle		1
G.	Leg Foot Pads		4
H.	Wheel Axle		1
I.	Dust Collection 90° Elbow 4"		1
J.	Lifting Handle Assemblies		2
K.	Left/Right Wheel Brackets	1 Each
L.	Left/Right Short Top Braces 14⁜5⁄8"		2
M.	Short Bottom Braces 17⁜1⁄4"		2
N.	Hardware (Not Shown)
	—Carriage Bolts M8-1.25 x 12 (Stand)		32
	—Lock Nuts M8-1.25 (Stand)		32
	—Cotter Pins 4 x 20mm (Wheels)		2
	—Hex Bolts M8-1.25 x 16 (Wheels)		4
	—Lock Nuts M8-1.25 (Wheels)		4
	—Flat Head Screws M6-1 x 10 (Handles)...		4
	—Lock Nuts M6-1 (Handles)		4
	—Hex Bolts M10-1.5 x 30 (Sander)		4
	—Flat Washer 10mm (Sander)		4
	—Hex Nuts M10-1.5 (Sander)		4

-12-

	B
				C
						D
M
	L
			K
		J					E
					G

I

H F

Figure 3. Small component inventory.

NOTICE

If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are pre-installed for shipping, or they become hidden by packaging materials.

Model G0716 (Mfg. Since 2/11)