Grizzly G0716 owner manual Gib Adjustment, To adjust the gibs

Page 36

Gib Adjustment

The gibs apply pressure to the slides of the sand- ing head (see Figures 32–33). This allows the sanding head assembly to accurately move up and down when using the elevation handwheel.

Slide

Lock

Nut

Figure 32. Location of rear slide and lock nut.

 

 

Gib

Cap

 

 

(1 of 2)

Screws

 

 

 

 

 

 

Figure 33. Location of rear gib and cap screws.

-34-

If the gibs are too loose, the sanding drum will deflect up during operation, which will result in poor sanding results.

If the gibs are too tight, it will be difficult to adjust the sanding drum elevation, which will cause excessive wear on the parts of the elevation sys- tem.

To adjust the gibs:

1.DISCONNECT SANDER FROM POWER!

2.Loosen the center lock nut on both gibs (see

Figure 32).

3.Adjust each of the six gib cap screws in or out in small, equal amounts, then rotate the elevation handwheel to test the sanding head movement.

Note: Tighten the cap screws to increase gib pressure.

4.Repeat Step 3 until you are satisfied with the sanding head movement, then re-tighten both lock nuts.

Model G0716 (Mfg. Since 2/11)

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model G0716 Drum Sander Page Table of Contents Introduction Manual Accuracy Contact InfoMachine Description Identification Model G0716 identificationMachine Data Sheet Drum Information Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Drum Sanders Power Supply AvailabilityFull-Load Current Rating Circuit RequirementsGrounding & Plug Requirements Extension CordsMinimum Gauge Size 14 AWG 50 ftSetup Needed for SetupUnpacking Description QtyInventory Inventory Figure QtyHardware Recognition Chart Site Considerations Assembly To assemble the drum sanderStep Page Dust collection elbow installed Dust Collection Power Connection Connecting PowerDisconnecting Power To connect a dust collection hoseRecommended Adjustments Factory adjustments that should be verifiedTest Run To test run the machineOperations Basic ControlsWorkpiece Inspection SandpaperSelection Before sanding, inspect all workpieces for the followingReplacement Remove Gray Areas On Both EndsItems Needed Qty To replace the sandpaper stripPage Sandpaper Goes here To adjust the depth of cut Depth of CutAccessories on Feed RateSanding Tips Sanding Operation To surface sand a workpieceAccessories G1512 Pro-StikBelt CleanerMaintenance General CleaningCleaning Sandpaper Lubrication ScheduleService TroubleshootingSymptom Possible Cause Possible Solution Symptom Possible Cause Possible Solution Conveyor Belt Tension & Tracking Belt TensionBelt Tracking Tools Needed QtyGib Adjustment To adjust the gibsConveyor Belt to Drum Alignment IncorrectPressure Roller Adjustment To adjust the pressure rollersTool Needed Qty Adjusting Elevation Stop To adjust the elevation stop screwConveyor Belt Replacement To replace the conveyor beltWiring Wiring Safety InstructionsG0716 Wiring Diagram Switch wiringParts StandConveyor Conveyor Parts List Main Main Parts List DescriptionMachine Labels Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0716 specifications

The Grizzly G0716 is a versatile and robust wood lathe designed for both amateur and professional woodworkers. With its powerful motor and impressive features, this lathe stands out in the woodworking community for its reliability and performance.

At the heart of the Grizzly G0716 is a 1 HP motor, which delivers high torque and allows for smooth operation at various speeds. The lathe offers variable speed capabilities ranging from 400 to 3,600 RPM, providing woodworkers with the flexibility to adjust the speed based on the material and application. This feature is particularly beneficial for turning different types of wood, ensuring optimal results for both roughing and finishing cuts.

The G0716 has a sturdy cast iron construction, which contributes to its stability and minimizes vibrations during operation. This solid build not only ensures durability but also enhances the overall turning experience, leading to more precise and consistent results. The spacious bed length of 32 inches provides ample space for working on larger projects, making it suitable for various applications, from bowls to larger spindles.

One of the standout characteristics of the Grizzly G0716 is its user-friendly design. It includes a sliding tailstock that allows for easy adjustments and precise alignment, facilitating seamless operation. The quick-release tailstock and easy-to-read indexing head enhance usability, allowing woodworkers to switch between different projects without unnecessary delays.

In terms of safety, the lathe is equipped with a safety switch that prevents accidental start-up, ensuring that users remain protected during operation. Additionally, the machine's well-placed controls allow for convenient access, so operators can stay focused on their work while easily making adjustments as needed.

The G0716 is compatible with a variety of tools and accessories, increasing its versatility and making it a valuable addition to any workshop. Whether you are a beginner looking to explore the world of turning or an experienced woodworker seeking a reliable lathe for your projects, the Grizzly G0716 offers a blend of power, precision, and practicality that enhances the woodworking experience. Its combination of features, safety elements, and robust construction sets a standard for quality lathes in its class.
Top Page Image Contents