Grizzly G0716 owner manual Safety Instructions for Machinery

Page 8

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

 

 

WILL result in death or serious injury.

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

COULd result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

MAY result in minor or moderate injury. It may also be used to alert

 

 

 

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

OWNER’S MANUAL. Read and understand this owner’s manual BEFORE using machine. Untrained users can be seriously hurt.

EYE PROTECTION. Always wear ANSI-approved safety glasses or a face shield when operating or observing machinery to reduce the risk of eye injury or blindness from flying particles. Everyday eyeglasses are not approved safety glasses.

HAzARdOUS dUST. Dust created while using machinery may cause cancer, birth defects, or long-term respiratory damage. Be aware of dust hazards associated with each workpiece material, and always wear a NIOSH-approved respirator to reduce your risk.

WEARING PROPER APPAREL. Do not wear clothing, apparel, or jewelry that can become entangled in moving parts. Always tie back or cover long hair. Wear non-slip footwear to avoid accidental slips which could cause a loss of work- piece control.

HEARING PROTECTION. Always wear hear- ing protection when operating or observiing loud machinery. Extended exposure to this noise without hearing protection can cause permanent hearing loss.

MENTAL ALERTNESS. Be mentally alert when running machinery. Never operate under the influence of drugs or alcohol, when tired, or when distracted.

-6-

Model G0716 (Mfg. Since 2/11)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model G0716 Drum Sander Page Table of Contents Machine Description IntroductionManual Accuracy Contact Info Identification Model G0716 identificationMachine Data Sheet Drum Information Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Drum Sanders Power Supply AvailabilityFull-Load Current Rating Circuit RequirementsGrounding & Plug Requirements Extension CordsMinimum Gauge Size 14 AWG 50 ftSetup Needed for SetupUnpacking Description QtyInventory Inventory Figure QtyHardware Recognition Chart Site Considerations Step AssemblyTo assemble the drum sander Page Dust collection elbow installed Dust Collection Power Connection Connecting PowerDisconnecting Power To connect a dust collection hoseRecommended Adjustments Factory adjustments that should be verifiedTest Run To test run the machineOperations Basic ControlsWorkpiece Inspection SandpaperSelection Before sanding, inspect all workpieces for the followingReplacement Remove Gray Areas On Both EndsItems Needed Qty To replace the sandpaper stripPage Sandpaper Goes here To adjust the depth of cut Depth of CutSanding Tips Accessories onFeed Rate Sanding Operation To surface sand a workpieceAccessories G1512 Pro-StikBelt CleanerMaintenance General CleaningCleaning Sandpaper Lubrication ScheduleService TroubleshootingSymptom Possible Cause Possible Solution Symptom Possible Cause Possible Solution Conveyor Belt Tension & Tracking Belt TensionBelt Tracking Tools Needed QtyGib Adjustment To adjust the gibsConveyor Belt to Drum Alignment IncorrectTool Needed Qty Pressure Roller AdjustmentTo adjust the pressure rollers Adjusting Elevation Stop To adjust the elevation stop screwConveyor Belt Replacement To replace the conveyor beltWiring Wiring Safety InstructionsG0716 Wiring Diagram Switch wiringParts StandConveyor Conveyor Parts List Main Main Parts List DescriptionMachine Labels Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0716 specifications

The Grizzly G0716 is a versatile and robust wood lathe designed for both amateur and professional woodworkers. With its powerful motor and impressive features, this lathe stands out in the woodworking community for its reliability and performance.

At the heart of the Grizzly G0716 is a 1 HP motor, which delivers high torque and allows for smooth operation at various speeds. The lathe offers variable speed capabilities ranging from 400 to 3,600 RPM, providing woodworkers with the flexibility to adjust the speed based on the material and application. This feature is particularly beneficial for turning different types of wood, ensuring optimal results for both roughing and finishing cuts.

The G0716 has a sturdy cast iron construction, which contributes to its stability and minimizes vibrations during operation. This solid build not only ensures durability but also enhances the overall turning experience, leading to more precise and consistent results. The spacious bed length of 32 inches provides ample space for working on larger projects, making it suitable for various applications, from bowls to larger spindles.

One of the standout characteristics of the Grizzly G0716 is its user-friendly design. It includes a sliding tailstock that allows for easy adjustments and precise alignment, facilitating seamless operation. The quick-release tailstock and easy-to-read indexing head enhance usability, allowing woodworkers to switch between different projects without unnecessary delays.

In terms of safety, the lathe is equipped with a safety switch that prevents accidental start-up, ensuring that users remain protected during operation. Additionally, the machine's well-placed controls allow for convenient access, so operators can stay focused on their work while easily making adjustments as needed.

The G0716 is compatible with a variety of tools and accessories, increasing its versatility and making it a valuable addition to any workshop. Whether you are a beginner looking to explore the world of turning or an experienced woodworker seeking a reliable lathe for your projects, the Grizzly G0716 offers a blend of power, precision, and practicality that enhances the woodworking experience. Its combination of features, safety elements, and robust construction sets a standard for quality lathes in its class.
Top Page Image Contents