Grizzly G0716 owner manual Conveyor Belt Tension & Tracking, Belt Tracking, Tools Needed Qty

Page 35

Conveyor Belt

Tension & Tracking

The conveyor belt tension and tracking must be properly adjusted to ensure that the workpiece correctly and safely passes underneath the sand- ing drum and that the conveyor belt does not become damaged during operation.

If the conveyor belt slips on the rollers then the belt tension needs to be increased.

If the conveyor belt moves to one side or the other when it is running, then the belt tracking needs to be adjusted.

Tools Needed

Qty

Phillips Screwdriver #2

1

Open-End Wrench 10mm

1

Belt Tension

1.DISCONNECT SANDER FROM POWER!

2.Make sure the conveyor belt is centered on the rollers.

—If it is not, release the belt tension equally on both sides of the belt. This is done by holding the hex nut still (see Figure 30) while rotating the Phillips head screw coun- terclockwise until you can move the belt from side-to-side with your hand. Then, center the belt on the rollers.

Tensioners

 

 

Hex Nut

Screw

 

 

 

 

Figure 30. Conveyor belt tensioners.

Model G0716 (Mfg. Since 2/11)

3.As a starting point, make sure that the ends of both tensioning screws extend evenly approximately 1⁄4" beyond the hex nut, as shown in Figure 31.

—If the belt slips during operation, rotate the screws clockwise in small amounts until the belt no longer slips on the rollers.

Screw Extends

Approximately 1⁄4"

Figure 317. Tensioning screw extending

approximately 1⁄4" beyond hex nut.

Belt Tracking

1.Run the conveyor belt at high speed and note if it tracks to one side or the other—this make take a couple of minutes to show up.

Note: To avoid damaging the belt, do not allow the belt to track off the rollers.

—If the conveyor belt does not track to one side or the other, no further adjustments are necessary.

Note: In the next step, you may have to wait for several minutes to notice a change in tracking.

2.Rotate the tensioner screw clockwise on the side the belt is tracking toward until the belt moves to the center of the rollers, then back off the screw until it stops tracking to the opposite side.

3.Allow the belt to run for several minutes to make sure it is tracking properly. If neces- sary, repeat this procedure until the belt is properly tracking.

-33-

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Model G0716 Drum Sander Page Table of Contents Machine Description IntroductionManual Accuracy Contact Info Model G0716 identification IdentificationMachine Data Sheet Drum Information Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Drum Sanders Circuit Requirements Power SupplyAvailability Full-Load Current Rating50 ft Grounding & Plug RequirementsExtension Cords Minimum Gauge Size 14 AWGDescription Qty SetupNeeded for Setup UnpackingInventory Figure Qty InventoryHardware Recognition Chart Site Considerations Step AssemblyTo assemble the drum sander Page Dust collection elbow installed To connect a dust collection hose Dust Collection Power ConnectionConnecting Power Disconnecting PowerTo test run the machine Recommended AdjustmentsFactory adjustments that should be verified Test RunBasic Controls OperationsBefore sanding, inspect all workpieces for the following Workpiece InspectionSandpaper SelectionTo replace the sandpaper strip ReplacementRemove Gray Areas On Both Ends Items Needed QtyPage Sandpaper Goes here Depth of Cut To adjust the depth of cutSanding Tips Accessories onFeed Rate To surface sand a workpiece Sanding OperationG1512 Pro-StikBelt Cleaner AccessoriesSchedule MaintenanceGeneral Cleaning Cleaning Sandpaper LubricationTroubleshooting ServiceSymptom Possible Cause Possible Solution Symptom Possible Cause Possible Solution Tools Needed Qty Conveyor Belt Tension & TrackingBelt Tension Belt TrackingTo adjust the gibs Gib AdjustmentIncorrect Conveyor Belt to Drum AlignmentTool Needed Qty Pressure Roller AdjustmentTo adjust the pressure rollers To adjust the elevation stop screw Adjusting Elevation StopTo replace the conveyor belt Conveyor Belt ReplacementWiring Safety Instructions WiringSwitch wiring G0716 Wiring DiagramStand PartsConveyor Conveyor Parts List Main Description Main Parts ListMachine Labels Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

G0716 specifications

The Grizzly G0716 is a versatile and robust wood lathe designed for both amateur and professional woodworkers. With its powerful motor and impressive features, this lathe stands out in the woodworking community for its reliability and performance.

At the heart of the Grizzly G0716 is a 1 HP motor, which delivers high torque and allows for smooth operation at various speeds. The lathe offers variable speed capabilities ranging from 400 to 3,600 RPM, providing woodworkers with the flexibility to adjust the speed based on the material and application. This feature is particularly beneficial for turning different types of wood, ensuring optimal results for both roughing and finishing cuts.

The G0716 has a sturdy cast iron construction, which contributes to its stability and minimizes vibrations during operation. This solid build not only ensures durability but also enhances the overall turning experience, leading to more precise and consistent results. The spacious bed length of 32 inches provides ample space for working on larger projects, making it suitable for various applications, from bowls to larger spindles.

One of the standout characteristics of the Grizzly G0716 is its user-friendly design. It includes a sliding tailstock that allows for easy adjustments and precise alignment, facilitating seamless operation. The quick-release tailstock and easy-to-read indexing head enhance usability, allowing woodworkers to switch between different projects without unnecessary delays.

In terms of safety, the lathe is equipped with a safety switch that prevents accidental start-up, ensuring that users remain protected during operation. Additionally, the machine's well-placed controls allow for convenient access, so operators can stay focused on their work while easily making adjustments as needed.

The G0716 is compatible with a variety of tools and accessories, increasing its versatility and making it a valuable addition to any workshop. Whether you are a beginner looking to explore the world of turning or an experienced woodworker seeking a reliable lathe for your projects, the Grizzly G0716 offers a blend of power, precision, and practicality that enhances the woodworking experience. Its combination of features, safety elements, and robust construction sets a standard for quality lathes in its class.
Top Page Image Contents