SECTION 6: OPERATIONS
Keep loose clothing out of the way of machinery and keep hair pulled back.
Disconnect power to the machine when perform- ing any adjustments or maintenance. Failure to do this may result in seri- ous personal injury.
Wear safety glasses dur- ing all operations on the shaper. Failure to com- ply may result in serious personal injury.
Always wear a dust mask when operating the table saw. Using this machine produces saw- dust which may cause allergic reactions or res- piratory problems.
NOTICE
The following section was designed to give instructions on the basic operations of this table saw. However, it is in no way compre- hensive of every table saw application. There are many different jigs that can be built to increase safety, accuracy, and types of cuts. WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal train- ing to maximize the potential of your table saw.
Pre-Run Check
Before you begin to use your Model G1023SL/G1023SLX
1.Are all the fasteners tight?
2.Is the blade mounted correctly?
3.Is the saw stable?
4.Is it wired properly?
5.Is your electrical system properly config- ured?
6.Have you checked your workpiece for obvi- ous defects?
7.Are the
8.Is the guard assembly installed and func- tional?
9.Have you checked the saw blade clearance when it is adjusted to varying angles and depths?
10.Have you read all the warnings and direc- tions regarding the operation of this machine?
G1023SL/G1023SLX