Unpacking | Piece Inventory | |
|
|
|
|
|
|
The Model G1012 Bandsaw is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, please call Customer Service immediately for advice.
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
The Model G1012 is a heavy machine (456 lbs. shipping weight). DO NOT
If moving this machine up or down stairs, the machine must be disman- tled and moved in smaller pieces. Make sure the stairs are capable of sup- porting the combined weight of the machine parts and the people mov- ing them.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
After all the parts have been removed from the carton, you should have:
•Bandsaw Unit (see Figure 2)
•Stand Components (see Figure 3) Top (1)
Legs (4)
Horizontal Braces (2) Stand Sides (2) Motor Bracket (1) Pulley Cover (1)
•Other Bandsaw Components
(see Figure 4)
Table
Motor
Miter Gauge
Fence
Fence Rails (2)
Trunnion Support Bracket
A31, A32, A33
Motor Pulley
Stepped Pulley
Wheel Pulley
Hardware Bags
Figure 2. Bandsaw unit.
G1012 18" Bandsaw |