Grizzly Optimize Your Bandsaw Setup: G0457 Miter Gauge and Fence Calibration Guide
Page 25
Figure 28. Squaring miter gauge to blade.
Miter Gauge
The miter gauge needs to be calibrated to the blade when it is first mounted in the miter slot.

Fence Alignment

To ensure cutting accuracy when the fence is first installed, the fence should be aligned with the

miter slot.

 

To calibrate the miter gauge:

To align the fence parallel with the miter slot:

 

 

1.

Place one edge of a machinist's square

1.

If the fence is mounted on the left-hand side

against the face of the miter gauge and the

 

of the blade, remove it and remount it next to

other side against the blade face, as shown

 

the miter slot.

in Figure 28.

2.

Loosen the four cap screws located on the

 

 

 

 

 

top face of the fence (Figure 27).

 

 

 

 

2. Loosen the lock knob on the miter gauge and

 

Figure 27. Four fence cap screws.

 

adjust it flush with the edge of the square.

3.

Adjust the fence face parallel with the edge of

3.

Tighten the lock knob, and verify the setting.

 

the miter slot.

 

Note: Sometimes the tightening procedure

 

 

 

 

4.

Tighten the four cap screws, being careful not

 

can affect the adjustment.

 

to move the fence. 

4.

Loosen the screw that secures the angle

 

 

 

pointer and adjust the pointer to the 0˚ mark on the scale.

5. Retighten the screw that secures the angle pointer.

G0457 14" Industrial Bandsaw (Mfg. Since 5/11)

-23-

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model G0457 Industrial Bandsaw Page Table of Contents Manual Accuracy Contact Info IntroductionIdentification Machine Data Sheet Cutting Capacities Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety Instructions for Bandsaws Availability Power SupplyFull-Load Current Rating Circuit InformationTypical 5-20 plug and receptacle Grounding RequirementsExtension Cords Disabling & Locking SwitchVoltage Conversion Needed for Setup SetupUnpacking Description QtyHardware Recognition Chart Inventory Contents Figures QtyHardware Not shown Placement Location Clean UpSite Considerations Floor LoadTo assemble the bandsaw AssemblyTable installed on trunnions Installed front rail To connect a dust collection hose Dust CollectionTo center track the blade Blade TrackingChanges in the blade tension may change the blade tracking Table Stop Calibration Test RunTo test run the machine Blade Tracking onTo calibrate the pointer on the table tilt scale Table AlignmentTo calibrate the miter gauge Fence AlignmentTo align the fence parallel with the miter slot To adjust the support bearings Adjusting Support BearingsBlade Tensioning To tension the bandsaw bladeTop View To adjust the upper and lower blade guides Blade Guide AdjustmentsBasic Controls OperationsStraight Cuts OverviewIrregular Cuts Basic Cutting TipsTable Tilt Workpiece InspectionTo tilt the table Guide Post Ripping To adjust guide postTo rip with the Model G0457 To crosscut with the Model G0457 CrosscuttingResawingTo resaw a workpiece Cutting CurvesTo complete a stacked cut Stacked CutsBlade Length Blade InformationBlade Width Tooth StyleBlade Care Tooth PitchBlade Breakage Most common causes of blade breakage areTo remove the blade Blade ChangesTo replace the blade Accessories H5408-Blade Tensioning Gauge Half-mask respirator with disposable Cartridge filtersG8983-Tilting Roller Stand G1928-Bandsaw HandbookG8984-Single Roller Stand G8985-5 Roller StandCleaning MaintenanceSchedule Unpainted Cast IronBlade Tension Leadscrew Guide PostTable Trunnions Redressing Rubber TiresTo redress the rubber tires Troubleshooting ServiceMotor & Electrical Adjust the feet on the bottom of the stand relocate Tensioning V-Belt Checking V-BeltTo check the V-belt Steps Tools Needed QtyTo replace the V-belt Replacing V-BeltCorrect blade lead Shimming Table Blade LeadSkewing your fence To shim the tableShifting Table Components and Hardware Needed Qty Wheel AlignmentTo check if your wheels are coplanar Coplanarity Gauge Wiring Safety Instructions Wiring110V Main Description Main Parts ListTrunnion Bracket Cast Iron Description ComponentsStand Rear of Machine LabelsComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty & Returns Order Hours a DAY

G0457 specifications

The Grizzly G0457 is a versatile and robust woodworking tool designed to meet the needs of both amateur woodworkers and professional craftsmen. This cabinet-style bandsaw offers a blend of power, precision, and durability, making it an essential addition to any serious workshop.

One of the standout features of the G0457 is its powerful 2 HP motor, which provides ample strength to cut through a variety of materials, including hardwoods and softwoods. This motor is designed for consistent performance, minimizing the risk of stalling during operation. Furthermore, the bandsaw is equipped with a large cutting capacity, boasting a 14-inch resaw height and a 13-inch maximum cutting width, enabling users to tackle larger projects with ease.

The construction of the Grizzly G0457 is another key highlight. The machine features a solid cast iron frame that enhances stability and reduces vibrations during operation. This sturdy design contributes to improved accuracy, ensuring that cuts are clean and true. Furthermore, the oversized wheels are made of aluminum, allowing for smoother operation and a longer lifespan.

In terms of technology, the G0457 utilizes a precision-machined aluminum fence system. This system is designed for easy adjustments, providing users with the ability to make quick and accurate cuts. The bandsaw also includes a blade tension release, which simplifies blade changes and prolongs the lifespan of the blade itself. Additionally, the quick-release blade tension lever allows for easy adjustments, enhancing overall efficiency.

Safety features are also a priority in the design of the Grizzly G0457. It includes an easy-to-access power switch and a blade guard to protect users from potential injuries. The adjustable upper and lower blade guides ensure optimal performance and safety during operation.

The G0457 is also designed with convenience in mind. It includes a built-in dust port to help maintain a clean workspace. This feature minimizes dust accumulation, promoting a healthier environment and improving visibility while cutting.

In summary, the Grizzly G0457 bandsaw is a powerful and reliable tool that combines innovative features, robust construction, and user-friendly design. Whether you are ripping boards, resawing, or making intricate cuts, the G0457 stands out as a reliable choice for anyone serious about woodworking. Its attention to detail, performance capabilities, and safety features make it an invaluable asset in any workshop.
Top Page Image Contents