Grizzly G0457 owner manual Workpiece Inspection, Table Tilt, To tilt the table

Page 31

Workpiece

Inspection

Some wood workpieces are not safe to cut or may require modification before they are safe to cut.

Before making cuts, get in the habit of inspect- ing all workpieces for the following:

•Material Type: This machine is intended for cutting natural and man-made wood prod- ucts, laminate covered wood products, and some plastics. Cutting drywall or cementi- tious backer board creates extremely fine dust and may reduce the life of the bearings. This machine is NOT designed to cut metal, glass, stone, tile, etc.; cutting these materials with this saw may lead to injury.

•Foreign Objects: Nails, staples, dirt, rocks and other foreign objects are often embed- ded in wood. While cutting, these objects can become dislodged and hit the operator or break the blade, which might then fly apart. Always visually inspect your workpiece for these items. If they cannot be removed, do NOT cut the workpiece.

•Large/Loose Knots: Loose knots can become dislodged during the cutting opera- tion. Large knots can cause blade damage. Choose workpieces that do not have large/ loose knots or plan ahead to avoid cutting through them.

•Wet or "Green" Stock: Cutting wood with a moisture content over 20% causes unnec- essary wear on the blade and yields poor results.

•Excessive Warping: Workpieces with exces- sive cupping, bowing, or twisting are danger- ous to cut because they are unstable and can move unpredictably when being cut. DO NOT use workpieces with these characteristics!

•Minor Warping: Workpieces with slight cup- ping can be safely supported if the cupped side faces the table or fence. On the contrary, a workpiece supported on the bowed side will rock during a cut, leading to loss of control.

G0457 14" Industrial Bandsaw (Mfg. Since 5/11)

Table Tilt

The bandsaw table will tilt 8˚ left and 45˚ right to provide a wide range of cutting options. Most cut- ting operations are done at 90° and rarely will the table need to be tilted left. Remove the positive stop bolt to tilt the table to the left.

To tilt the table:

1.Loosen the two table trunnion hand knobs.

2.Position the table to the desired angle of tilt. Refer to the angle gauge on the front table trunnion for the tilting angle.

3.Retighten both table trunnion hand knobs.

-29-

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model G0457 Industrial Bandsaw Page Table of Contents Manual Accuracy Contact Info IntroductionIdentification Machine Data Sheet Cutting Capacities Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety Instructions for Bandsaws Circuit Information Power SupplyAvailability Full-Load Current RatingTypical 5-20 plug and receptacle Grounding RequirementsExtension Cords Disabling & Locking SwitchVoltage Conversion Description Qty SetupNeeded for Setup UnpackingHardware Recognition Chart Inventory Contents Figures QtyHardware Not shown Floor Load Clean UpPlacement Location Site ConsiderationsTo assemble the bandsaw AssemblyTable installed on trunnions Installed front rail To connect a dust collection hose Dust CollectionTo center track the blade Blade TrackingChanges in the blade tension may change the blade tracking Blade Tracking on Test RunTable Stop Calibration To test run the machineTo calibrate the pointer on the table tilt scale Table AlignmentTo calibrate the miter gauge Fence AlignmentTo align the fence parallel with the miter slot To tension the bandsaw blade Adjusting Support BearingsTo adjust the support bearings Blade TensioningTop View To adjust the upper and lower blade guides Blade Guide AdjustmentsBasic Controls OperationsBasic Cutting Tips OverviewStraight Cuts Irregular CutsTable Tilt Workpiece InspectionTo tilt the table Guide Post Ripping To adjust guide postTo rip with the Model G0457 To crosscut with the Model G0457 CrosscuttingResawingTo resaw a workpiece Cutting CurvesTo complete a stacked cut Stacked CutsTooth Style Blade InformationBlade Length Blade WidthMost common causes of blade breakage are Tooth PitchBlade Care Blade BreakageTo remove the blade Blade ChangesTo replace the blade Accessories H5408-Blade Tensioning Gauge Half-mask respirator with disposable Cartridge filtersG8985-5 Roller Stand G1928-Bandsaw HandbookG8983-Tilting Roller Stand G8984-Single Roller StandUnpainted Cast Iron MaintenanceCleaning ScheduleBlade Tension Leadscrew Guide PostTable Trunnions Redressing Rubber TiresTo redress the rubber tires Troubleshooting ServiceMotor & Electrical Adjust the feet on the bottom of the stand relocate Steps Tools Needed Qty Checking V-BeltTensioning V-Belt To check the V-beltTo replace the V-belt Replacing V-BeltTo shim the table Shimming Table Blade LeadCorrect blade lead Skewing your fenceShifting Table Components and Hardware Needed Qty Wheel AlignmentTo check if your wheels are coplanar Coplanarity Gauge Wiring Safety Instructions Wiring110V Main Description Main Parts ListTrunnion Bracket Cast Iron Description ComponentsStand Rear of Machine LabelsComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty & Returns Order Hours a DAY

G0457 specifications

The Grizzly G0457 is a versatile and robust woodworking tool designed to meet the needs of both amateur woodworkers and professional craftsmen. This cabinet-style bandsaw offers a blend of power, precision, and durability, making it an essential addition to any serious workshop.

One of the standout features of the G0457 is its powerful 2 HP motor, which provides ample strength to cut through a variety of materials, including hardwoods and softwoods. This motor is designed for consistent performance, minimizing the risk of stalling during operation. Furthermore, the bandsaw is equipped with a large cutting capacity, boasting a 14-inch resaw height and a 13-inch maximum cutting width, enabling users to tackle larger projects with ease.

The construction of the Grizzly G0457 is another key highlight. The machine features a solid cast iron frame that enhances stability and reduces vibrations during operation. This sturdy design contributes to improved accuracy, ensuring that cuts are clean and true. Furthermore, the oversized wheels are made of aluminum, allowing for smoother operation and a longer lifespan.

In terms of technology, the G0457 utilizes a precision-machined aluminum fence system. This system is designed for easy adjustments, providing users with the ability to make quick and accurate cuts. The bandsaw also includes a blade tension release, which simplifies blade changes and prolongs the lifespan of the blade itself. Additionally, the quick-release blade tension lever allows for easy adjustments, enhancing overall efficiency.

Safety features are also a priority in the design of the Grizzly G0457. It includes an easy-to-access power switch and a blade guard to protect users from potential injuries. The adjustable upper and lower blade guides ensure optimal performance and safety during operation.

The G0457 is also designed with convenience in mind. It includes a built-in dust port to help maintain a clean workspace. This feature minimizes dust accumulation, promoting a healthier environment and improving visibility while cutting.

In summary, the Grizzly G0457 bandsaw is a powerful and reliable tool that combines innovative features, robust construction, and user-friendly design. Whether you are ripping boards, resawing, or making intricate cuts, the G0457 stands out as a reliable choice for anyone serious about woodworking. Its attention to detail, performance capabilities, and safety features make it an invaluable asset in any workshop.
Top Page Image Contents