13.Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use.
14.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.
15.Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Do not carry a plugged in tool with your finger on the switch.
16.Use outdoor rated extension cords. When a tool is used outdoors, use only extension cords that are intended for outdoor use and are so marked.
17.Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.
18.Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of the tool. A part that is damaged should be properly repaired or replaced by an authorised service facility, unless otherwise indicated in this Instruction Manual.
Defective switches must be replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly.
19.Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators, cookers and refrigerator enclosures.
20.Use only approved parts. When servicing, use only identical replacement parts. Use an authorised service facility to fit replacement parts.
WARNING. The use of an accessory or attachment, other than those recommended in this Instruction Manual, may present a risk of personal injury.
Additional safety rules for mitre saws
WARNINGS. Before connecting a tool to a power source (mains switch power point receptacle, outlet, etc.) be sure that the voltage supply is the same as that specified on the nameplate of the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool.
Using a power source with a voltage less than the nameplate rating is harmful to the motor.
Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool.
Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the blade.
•When operating the saw, use safety equipment including safety goggles or shield, ear protection, dust mask and protective clothing including safety gloves.
•Ensure that there is adequate general or localised lighting.
•Do not use the saw unless the guards are in place.
•Do not use the saw to cut metal or masonry.
•Do not let anyone under 18 years operate this saw.
•Ensure that the operator is adequately trained in the use, adjustment and operation of the machine.
•Do not use this saw to cut firewood.
•Keep the area free of tripping hazards.
•Report faults in the machine, including guards and saw blades, as soon as they are discovered.
•Ensure that the machine is always fixed to a bench, whenever possible.
•Always stand to one side when operating the saw.
•Never use a cracked or distorted saw blade.
•When cutting round wood, use clamps that prevent the workpiece from turning on both sides of the blade.
6