Global Machinery Company DB305SMS, DB250SMS instruction manual Know your product

Page 9

Know your product

Before using the saw, familiarise yourself with all the operating features and safety requirements.

1. Laser light assembly		24.	Switch trigger
2. Laser light on/off switch		25.	Mitre lock
3. Laser cover		26.	Spindle lock
4. Laser pitch control		27.	Dust extraction port
5. Saw arm		28.	Slide bars
6. Release knob		29.	Slide lock
7. Operating handle		30.	Trenching depth
8. Carrying handle			adjustment screw
9. Upper fixed blade guard		31.	Trenching stop
10.	Clamp assembly	32.	Trenching depth
11.	Clamp assembly lock		lock nut
	(x2)	33.	45° Bevel adjustment
12.	Rotating blade guard		screw (left)
13.	Guard retraction arm	34.	45° Bevel adjustment
14.	Blade bolt cover		screw (right)
15.	Dust bag	35.	0° Bevel adjustment
16.	Bevel lock		screw
17.	Bevel scale	36.	Release latch
18.	0° Bevel adjuster	37.	Side support bars (x2)
19.	Fence	38.	Side support bar
20.	6mm Hex key		location holes (2 sets)
21.	Mitre table	39.	Side support bar
22.	Mitre scale		locking screws
23.	Table insert	40.	Stabiliser bar
	(kerf plate)

13

30

32

31

3

10

11

37

38

22

17

7

24

36

9

12

14

1

19

39

21

23

25

2

26

8

27

29

5

20

34

18

35 33

4

15

6

28

16

40

9

Image 9

Contents Double Bevel Slide Compound Mitre Saw Contents Specifications Description of symbolsDear Customer IntroductionSafety rules for laser lights General safety instructionsDamage to hearing if effective earmuffs are not worn Page Additional safety rules for mitre saws Take additional care when trenching slotting Wear gloves when handling saw blades and rough materialsEnsure that the arm is properly secure when bevelling Select saw blades in relation to the material being cutAccessories Know your product Transportation UnpackingBench mounting Stabiliser barClamp assembly Bevel adjusterSlide lock Mitre table lockSpindle lock button Rotating lower Blade guardDust bag Switch 24 fig. S Setting the tableTurning on and off Turning on Redeye laser line GeneratorTo the base fig. d Setting the fence Square with the tableTighten the screws securing the fence Retighten the bevel lockChanging a blade Retighten the screw securing the mitre scale pointerRaise the saw arm 5 to its highest position Up and press Outer blade Washer where they Contact the bladeDirection as the blade Screw has a left hand Thread fig. l That the inner bladeAcross the grain Cross-cutting without slide actionMade with the mitre table Set at 0º fig. q. Mitre By loosening the clampBevel cut Cross-cutting With slide actionBevel cut is made by Angled to the fenceCompound mitre cut Adjusting the laser linesUsing the laser line generator Do not stare directly at the y laser beamTowards the eye of a person for longer than 0.25s Maintenance Power cord maintenance CleaningGeneral inspection Page Page Save this Manual for future reference