Maintenance, Table And Base, Lubrication

MAINTENANCE

General

Regular periodic maintenance on your Model W1676 will ensure its optimum performance. Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary.

1.Loose mounting bolts.

2.Worn switch.

3.Worn or damaged cords and plugs.

4.Damaged sanding belts or discs.

5.Any other condition that could hamper the safe operation of this machine.

Table And Base

Tables can be kept rust-free with regular appli- cations of products like Boeshield® T-9. For long term storage you may want to consider products like Kleen Bore's Rust Guardit™.

!	Disconnect power to the
	machine when perform-
	ing	any	maintenance,
	assembly		or	adjust-
	ments. Failure to do this
	may	result in		serious
	personal injury.

Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.

Wear safety glasses dur- ing the entire mainte- nance process. Failure to comply may result in serious personal injury.

Lubrication

Since all bearings are sealed and permanently lubricated, simply leave them alone until they need to be replaced. Do not lubricate them.

For other items on this machine, an occasional application of light machine oil is all that is nec- essary. Before applying lubricant, wipe the machine clean.

Your goal is to achieve adequate lubrication. Too much lubrication will attract dirt and saw- dust. Various parts of your machine could lose their freedom of movement as a result.

-26-