1
15
Figure 7. Stand and sanding unit.
34
8
5
2
9
1114
7
10
6 | 13 | 12 |
Figure 8. Component layout.
The following is a description of the components shipped with the Shop Fox® W1676. It is recom- mended that the components be laid out in a sim- ilar fashion to those in Figures 7 and 8. This will help in identification before beginning assembly. Should any part be missing, examine the packag- ing carefully. If any key parts are missing, call Woodstock International, Inc. at
| Item | QTY. |
1. | Sanding Unit | 1 |
2. | Sanding Belt | 1 |
3. | Sanding Disc | 1 |
4. | Cast Iron Disc | 1 |
5. | Idler Roller | 1 |
6. | Back Stop | 1 |
7. | Miter Gauge | 1 |
8. | Work Table | 1 |
9. | Table Support Rod | 1 |
10. Quick Release Handle | 1 | |
11. Dust Port | 1 | |
12. Idler Roller Guard | 1 | |
13. Bolt Bag | 1 | |
14. | 21⁄2" Dia. Dust Port | 1 |
15. Cabinet Stand | 1 | |
Contents of the Bolt Bag
QTY. | DESCRIPTION | LOCATION |
4 | Stand/Base | |
4 | 5⁄16'' Flat Washers | Stand/Base |
4 | Stand /Feet | |
4 | 5⁄16'' Flat Washers | Stand /Feet |
4 | Stand /Feet | |
4 | 3⁄16" Phillips® Screws | Dust Port |
4 | 3⁄16" Washers | Dust Port |
4 | 3⁄16" Hex Nuts | Dust Port |
1Long 4mm Allen® Wrench
4 | Rubber Feet | Stand /Feet |