Emerson CF230WW00, CF230ORB00, CF230BS00 owner manual Installation of Fan Assembly onto

How to Wire Your Ceiling Fan (Close-to-the-Ceiling) (cont.)

SUPPLY WHITE WIRE	RECEIVER WHITE
(NEUTRAL)
	WIRE
	RECEIVER
	BLACK WIRE

AC

I

N

SUPPLY BLACK WIRE (HOT)

GROUND WIRE

N

RECEIVER BLACK

WIRE

RECEIVER

BLUE WIRE

GREEN GROUND

WIRE FROM

HANGER BALL

ANTENNA

GREEN GROUND

WIRE FROM

HANGER

BRACKET

Figure 23

AC IN L

FAN

BLACK

WIRE

FAN BLUE WIRE

FAN WHITE WIRE

				MOTOR	L
MOTOR	N	LIGHT
			TO
TO		FOR

RECEIVER WHITE WIRE

Installation of Fan Assembly onto

Hanger Bracket (Close-to-the-Ceiling)

1.Partially install two #10-24x3/16 pan head screws and lock washers (supplied) into the hanger bracket as shown (Figure 24). Observe the ceiling cover to determine exact installation location of both screws. The protruding screws will be used to engage the ceiling cover.

2.Lift the fan assembly up to the hanger bracket. Engage the slots in the ceiling cover with the loosened screws in the bracket and turn the cover counterclockwise (Figure 24). Be sure that the lockwashers are between the screw heads and the ceiling cover. Immediately tighten both screws to lock the fan onto the hanger bracket.

3.Install the two #10-24x3/16 screws and lockwashers (supplied) into the hanger bracket ; tighten all screws securely.

! WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

FAN ASSEMBLY

Figure 24

TIGHTEN SCREW

INSTALL SCREW AND WASHER

INSTALL TWO #10-24 x 3/16

PAN HEAD SCREWS AND

LOCKWASHERS

13 U.L. Model No.: CF230