Emerson CF230BS00 Installation of Light Bulb & Lower Cover All Fans, Remote Control Procedures

Page 14

Installation of Light Bulb & Lower Cover (All Fans)

1.Install the 50-watt (maximum) GU10 base light bulb (supplied) into the light socket (Figure 25). Turn bulb clockwise to engage into the socket for secure fit.

NOTE: Do not touch the new 50-watt (maximum) MR-16, GU-10 bulb with your bare fingers; using a cloth or soft gloves to hold the bulb, gently push it into the socket and twist to lock the lamp into the socket (Figure 25). If there is any doubt that the bulb may have been contaminated by your touch, you should clean the bulb before its first

50-WATT GU10

BASE LIGHT BULB

use. Take a clean cloth dipped in a small amount of rubbing/isopropyl alcohol and gently brush off the bulb surface. If the lamp is hot, wait 30 minutes before cleaning.

CAUTION: To reduce the risk of electric shock, burns or other injury, disconnect the electric supply circuit to the fan before attempting to install or replace the halogen bulb.

CAUTION: To not touch halogen bulbs with bare hands. Fingerprints may result in shorter bulb life. Remove fingerprints with alcohol.

2. Place the lower cover into the opening in the light

kit plate assembly. Place the three pins on the light

kit plate assembly into the three mounting holes

located on the underside of the lower cover. Turn

the lower cover clockwise until it stops and locks

Figure 25

LIGHT SWITCH PIN (3)

Figure 26

LOWER COVER PIN (3)

LOWER

COVER

into place (Figure 26).

NOTE: Periodically check that the cover is seated fully clockwise in the light kit plate assembly.

3.You have now completed the assembly of your new ceiling fan. Proceed to the next section to program your remote controls.

Remote Control Procedures

General

Your Emerson Ceiling Fan/Light Remote Control consists of hand-held transmitter and a receiver which is mounted under the fan ceiling cover. The remote control is designed to separately control your ceiling fan speed and light intensity.

The remote control transmitter is powered by two AAA alkaline batteries (included). To prevent possible damage if the batteries should leak, be sure to remove the batteries when the control is not to be used for an extended period of time.

Code switches in the transmitter and receiver may be set in 32 different positions. If your fan and light go on and off without using your control, you may be getting interference from other remote units such as garage door openers, car alarms or security systems. To remedy this situations, simply change the combination code in your transmitter and receiver.

Preset Memory Feature

Your Emerson receiver is equipped with a preset memory feature. If the AC supply to the receiver is powered through a wall switch, when the switch is turned OFF, the control will remember the light intensity and fan speed. When the switch is turned back ON the light and fan will resume operation as they were prior to the switch being turned OFF.

14

U.L. Model No.: CF230

Image 14
Contents Veloce Safety Instructions Unpacking Instructions MaterialsInstallation of Hanger Bracket Electrical RequirementsLoosen TWO Installation of Blades & Light Assembly How to Assemble Your Ceiling Fan Standard Leads. Route the motor lead wires throughDownrod Ceiling Cover Trim Ring Coupling How to Wire Your Ceiling Fan Standard Supply White Wire Receiver White Neutral Installation of Ceiling Cover Standard Close-to-the-Ceiling InstallationHow to Wire Your Ceiling Fan Close-to-the-Ceiling Installation of Fan Assembly onto How to Wire Your Ceiling Fan Close-to-the-CeilingInstallation of Light Bulb & Lower Cover All Fans Remote Control ProceduresInstallation of Battery Energy Efficient Use of Ceiling Fans Operating Your Ceiling FanTrouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts MaintenanceAccessories Repair Parts Listing HOW to Order Repair PartsLimited Warranty

CF230BS00, CF230ORB00, CF230WW00 specifications

The Emerson CF230 series ceiling fans, including models CF230WW00, CF230ORB00, and CF230BS00, are designed to elevate both the aesthetics and comfort level of living spaces. These fans combine stylish design, advanced technology, and energy efficiency, making them an ideal choice for modern households.

Each model in the CF230 series features a sleek, minimalist design that seamlessly integrates into various decor styles, from contemporary to traditional. The CF230WW00 model boasts a classic white finish, which brightens any room and suits lighter color palettes. The CF230ORB00, on the other hand, showcases an oil-rubbed bronze finish that adds a touch of elegance and warmth, perfect for rustic or vintage-inspired interiors. Lastly, the CF230BS00 comes in a brushed steel finish that lends a modern and industrial edge, making it a versatile option for countless settings.

One of the standout features of the Emerson CF230 series is its innovative EcoMotor technology. This energy-efficient motor operates quietly and consumes half the energy of traditional fan motors, ensuring that the fans provide maximum airflow while minimizing energy costs. With adjustable speed settings, homeowners can select the ideal airflow for their needs, enhancing both comfort and energy efficiency.

Additionally, the CF230 fans have a compact size, featuring a 30-inch blade span that makes them an excellent choice for smaller rooms, such as bedrooms, home offices, or kitchens. The fans also come with a 3-speed pull chain, which allows for easy operation, although models may be compatible with remote controls or wall controls for added convenience.

Installation is simplified with the CF230’s lightweight design and user-friendly instructions, allowing homeowners to enjoy their new ceiling fan quickly. The durable materials used ensure longevity, and the fans are designed to withstand the test of time, providing reliable performance with minimal maintenance.

In summary, the Emerson CF230WW00, CF230ORB00, and CF230BS00 ceiling fans are exceptional choices for those seeking style, performance, and efficiency in compact spaces. With their energy-efficient EcoMotor, a range of attractive finishes, and user-friendly features, they represent a perfect blend of form and function for today’s modern home.