Emerson CF230WW00, CF230ORB00, CF230BS00 Electrical Requirements, Installation of Hanger Bracket

Page 4

Electrical Requirements

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The ceiling structure must be capable of reliably supporting at least 50 pounds.

! WARNING

To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 15.9 kg (35 lbs) or less", and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

! WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

! WARNING

To avoid fire or shock, follow all wiring instructions carefully. Any electrical work not described in these instructions should be done or approved by a licensed electrician.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

Your Emerson ceiling fan comes supplied with a Fan Remote Control which consists of a wall mounted switch which allows you to regulate your ceiling fan speed.

IMPORTANT: Your ceiling fan will not function properly, and may be damaged, if used with any wall dimmer switch or control other than the Emerson Electric Fan/Light Remote Control supplied with the fan.

Installation of Hanger Bracket

IMPORTANT

Your Emerson Ceiling is designed to be installed either in the standard manner, or in the close-to-the- ceiling manner. Using the standard method, the hanger ball/downrod assembly will suspend the fan several inches below the ceiling cover. Using the close-to-the-ceiling method, the ceiling cover installs directly on the fan motor housing, thus mounting the fan 3-1/2 inches closer to the ceiling than the standard methond. In no case should the fan blades be lower than seven feet above the floor. Depending on your desire mounting method, proceed to ‘INSTALLING HANGER BALL/DOWNROD ASSEMBLY” for standard mounting, or to “INSTALLING CEILING COVER ON FAN MOTOR HOUSING” for close-to-the-ceiling mounting.

! WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 1).

! WARNING

To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 15.9 kg (35 lbs) or less", and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

 

CEILING

 

CLOSE-TO-THE-CEILING

STANDARD

INSTALLTION

INSTALLTION

AT

 

LEAST

 

7'

 

AT

 

LEAST

 

7'

 

FLOOR

Figure 1

 

4

U.L. Model No.: CF230

Image 4
Contents Veloce Safety Instructions Unpacking Instructions MaterialsInstallation of Hanger Bracket Electrical RequirementsLoosen TWO Installation of Blades & Light Assembly How to Assemble Your Ceiling Fan Standard Leads. Route the motor lead wires throughDownrod Ceiling Cover Trim Ring Coupling How to Wire Your Ceiling Fan Standard Supply White Wire Receiver White Neutral Installation of Ceiling Cover Standard Close-to-the-Ceiling InstallationHow to Wire Your Ceiling Fan Close-to-the-Ceiling Installation of Fan Assembly onto How to Wire Your Ceiling Fan Close-to-the-CeilingInstallation of Light Bulb & Lower Cover All Fans Remote Control ProceduresInstallation of Battery Energy Efficient Use of Ceiling Fans Operating Your Ceiling FanTrouble Shooting Trouble Probable Cause Suggested RemedyAccessories MaintenanceRepair Parts Repair Parts Listing HOW to Order Repair PartsLimited Warranty

CF230BS00, CF230ORB00, CF230WW00 specifications

The Emerson CF230 series ceiling fans, including models CF230WW00, CF230ORB00, and CF230BS00, are designed to elevate both the aesthetics and comfort level of living spaces. These fans combine stylish design, advanced technology, and energy efficiency, making them an ideal choice for modern households.

Each model in the CF230 series features a sleek, minimalist design that seamlessly integrates into various decor styles, from contemporary to traditional. The CF230WW00 model boasts a classic white finish, which brightens any room and suits lighter color palettes. The CF230ORB00, on the other hand, showcases an oil-rubbed bronze finish that adds a touch of elegance and warmth, perfect for rustic or vintage-inspired interiors. Lastly, the CF230BS00 comes in a brushed steel finish that lends a modern and industrial edge, making it a versatile option for countless settings.

One of the standout features of the Emerson CF230 series is its innovative EcoMotor technology. This energy-efficient motor operates quietly and consumes half the energy of traditional fan motors, ensuring that the fans provide maximum airflow while minimizing energy costs. With adjustable speed settings, homeowners can select the ideal airflow for their needs, enhancing both comfort and energy efficiency.

Additionally, the CF230 fans have a compact size, featuring a 30-inch blade span that makes them an excellent choice for smaller rooms, such as bedrooms, home offices, or kitchens. The fans also come with a 3-speed pull chain, which allows for easy operation, although models may be compatible with remote controls or wall controls for added convenience.

Installation is simplified with the CF230’s lightweight design and user-friendly instructions, allowing homeowners to enjoy their new ceiling fan quickly. The durable materials used ensure longevity, and the fans are designed to withstand the test of time, providing reliable performance with minimal maintenance.

In summary, the Emerson CF230WW00, CF230ORB00, and CF230BS00 ceiling fans are exceptional choices for those seeking style, performance, and efficiency in compact spaces. With their energy-efficient EcoMotor, a range of attractive finishes, and user-friendly features, they represent a perfect blend of form and function for today’s modern home.