Emerson CF230ORB00, CF230WW00, CF230BS00 owner manual Installation of Blades & Light Assembly

Installation of Blades & Light Assembly

1.Mount the blade flanges to the fan blades using three #10-24 x 5/16” Phillips blade screws per blade (supplied) (Figure 4). Repeat for the three remaining blades.

! WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

2.Attach one blade assembly to the motor using the captive screw provided for each flange (Figure 5). Make sure the screws are tightened securely. Repeat this procedure for the other three blade assemblies.

NOTE: Take care not to scratch the fan housing when installing the blade assemblies.

3.Remove one of the fan motor assembly screw (and retain for later use) and loosen the two other screws for installation of the light kit plate assembly (Figure 6).

4.Remove and retain the wire connectors from the white and blue wires (Figure 6).

5.Connect the white wire from the ceiling fan to the white wire of the light kit plate (Figure 7). Connect the blue wire from the ceiling fan to the black wire of the light kit plate. Use wire connectors (previously removed) to make connections.

NOTE: Carefully tuck all wires and connectors into the fan motor assembly.

! WARNING

To avoid possible fire or shock, make sure that electrical wires are not pinched between the light kit plate assembly and the fan motor assembly.

10-24 x 5/16" FLANGE HEAD BLADE SCREW (3 Per Blade)

FAN BLADE

FAN BLADE

FLANGE

Figure 4

CAPTIVE SCREW

MOTOR BLADE FLANGE

HOUSING ASSEMBLY

Figure 5

REMOVE AND RETAIN

FAN MOTOR SCREW

REMOVE AND RETAIN

WIRE CONNECTORS (2)

LOOSEN TWO FAN

MOTOR SCREWS

Figure 6

		LIGHT KIT PLATE
		ASSEMBLY
	REINSTALL WIRE	LIGHT SWITCH
		BLACK WIRE
	CONNECTORS
		LIGHT SWITCH
		WHITE WIRE
		FAN MOTOR
		BLUE WIRE
		FAN MOTOR
Figure 7		WHITE WIRE

6 U.L. Model No.: CF230