Emerson CF230BS00, CF230ORB00, CF230WW00 owner manual Downrod Ceiling Cover Trim Ring Coupling

Page 8

How to Assemble Your Ceiling Fan (Standard) (cont.)

4.Make sure the grommet is properly installed in the coupling cover then slide the coupler cover on the downrod until it rests on the motor housing (Figure 12).

5.Place the ceiling cover trim ring and ceiling cover over the downrod. Be sure both pieces are oriented correctly (Figure 12).

DOWNROD

CEILING COVER

TRIM RING

COUPLING

GROMMET

COVER

 

Figure 12

6.Place the ceiling cover over the downrod. Be sure it is oriented correctly (Figure 13).

7.Reinstall the hanger ball (Figure 14) on the downrod as follows. Route the motor leads through the downrod. Position the pin through the two holes in the downrod and align the ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

! WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

8.The fan comes with blue, black and white leads that are 80” long. Before installing fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

9.Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 15).

10.Carefully lift the fan assembly and seat the hanger ball in the hanger bracket (Figure 15). The tab on the hanger bracket must seat in the groove in the hanger ball.

DOWNROD

CEILING

COVER

Figure 13

PIN

HANGER BALL

DOWNROD

SETSCREW

CEILING

COVER

Figure 14

NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.

! WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

HOOK

TAB

GROOVE

Figure 15

HANGER

BRACKET

#8-32 x 1-1/2" THREADED STUD (2)

HANGER

BALL

8

U.L. Model No.: CF230

Image 8
Contents Veloce Safety Instructions Unpacking Instructions MaterialsInstallation of Hanger Bracket Electrical RequirementsLoosen TWO Installation of Blades & Light Assembly How to Assemble Your Ceiling Fan Standard Leads. Route the motor lead wires throughDownrod Ceiling Cover Trim Ring Coupling How to Wire Your Ceiling Fan Standard Supply White Wire Receiver White Neutral Installation of Ceiling Cover Standard Close-to-the-Ceiling InstallationHow to Wire Your Ceiling Fan Close-to-the-Ceiling Installation of Fan Assembly onto How to Wire Your Ceiling Fan Close-to-the-CeilingInstallation of Light Bulb & Lower Cover All Fans Remote Control ProceduresInstallation of Battery Energy Efficient Use of Ceiling Fans Operating Your Ceiling FanTrouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts MaintenanceAccessories Repair Parts Listing HOW to Order Repair PartsLimited Warranty

CF230BS00, CF230ORB00, CF230WW00 specifications

The Emerson CF230 series ceiling fans, including models CF230WW00, CF230ORB00, and CF230BS00, are designed to elevate both the aesthetics and comfort level of living spaces. These fans combine stylish design, advanced technology, and energy efficiency, making them an ideal choice for modern households.

Each model in the CF230 series features a sleek, minimalist design that seamlessly integrates into various decor styles, from contemporary to traditional. The CF230WW00 model boasts a classic white finish, which brightens any room and suits lighter color palettes. The CF230ORB00, on the other hand, showcases an oil-rubbed bronze finish that adds a touch of elegance and warmth, perfect for rustic or vintage-inspired interiors. Lastly, the CF230BS00 comes in a brushed steel finish that lends a modern and industrial edge, making it a versatile option for countless settings.

One of the standout features of the Emerson CF230 series is its innovative EcoMotor technology. This energy-efficient motor operates quietly and consumes half the energy of traditional fan motors, ensuring that the fans provide maximum airflow while minimizing energy costs. With adjustable speed settings, homeowners can select the ideal airflow for their needs, enhancing both comfort and energy efficiency.

Additionally, the CF230 fans have a compact size, featuring a 30-inch blade span that makes them an excellent choice for smaller rooms, such as bedrooms, home offices, or kitchens. The fans also come with a 3-speed pull chain, which allows for easy operation, although models may be compatible with remote controls or wall controls for added convenience.

Installation is simplified with the CF230’s lightweight design and user-friendly instructions, allowing homeowners to enjoy their new ceiling fan quickly. The durable materials used ensure longevity, and the fans are designed to withstand the test of time, providing reliable performance with minimal maintenance.

In summary, the Emerson CF230WW00, CF230ORB00, and CF230BS00 ceiling fans are exceptional choices for those seeking style, performance, and efficiency in compact spaces. With their energy-efficient EcoMotor, a range of attractive finishes, and user-friendly features, they represent a perfect blend of form and function for today’s modern home.