Woodstock W1754 owner manual Unpacking, Items Needed for Setup, Inventory

Page 11

W1754 20" Planer With Mobile Base

SETUP

Unpacking

The SHOP FOX® Model W1754 has been carefully pack- aged for safe transporting. If you notice the machine has been damaged, please contact your authorized SHOP FOX® dealer immediately.

Items Needed for Setup

The following items are needed, but not included, to set up your machine:

• Safety Glasses (for each person)		........................1
•	Solvent Cleaner	1
• Shop Rags for Cleaning		As Needed
• Extra Person for Lifting Help		1
•	Fork Lift	1
• Straightedge (see Page 12)		1
•	Phillips Screwdriver #2	1

Inventory

The following is a description of the main components shipped with the SHOP FOX® Model W1754. Lay the com- ponents out to inventory them.

Note: Some parts and hardware may already be installed on the machine. Make sure to check the machine when you use this inventory list.

If any parts are missing, examine the pack- aging for the missing parts. For any missing parts, find the part number in the back of this manual and contact Woodstock International, Inc. at (360) 734-3482 or at

tech-support@shopfox.biz

SUFFOCATION HAZARD!

Immediately discard all

plastic bags and pack-

ing materials to elimi-

nate choking/suffocation

hazards for children and

animals.

TURN OFF and LOCK your master power switch so power is not available to the planer before you do any assembly OFF or adjustment tasks. If you ignore this warning serious electrical shock may occur, causing

injury or death!

SET UP

Box Inventory (Figure 3)		Qty
A.	Planer Unit	1
B.	Dust Hood	1
C.	Table Extension Wings	2
D.	Handwheel	1
E.	Foot Lifting Lever	1
F.	Caster	1
G.	Knife Gauge	1

C

B

D

E

A

F G

Figure 3. Planer box inventory.

-9-

Image 11

Contents Planer with Mobile Base Page Contents Woodstock Technical Support IntroductionIntroduction Controls and Features Standard Safety Instructions SafetyAlways Lock Mobile Bases Before Operating Machinery Additional Safety Instructions for Planers 220V Operation Electrical SpecificationsElectrical Inventory SetupItems Needed for Setup UnpackingHardware and Tools Not Shown Machine PlacementLifting Planer These items are coated and must be cleaned Cleaning MachineExtension wing fasteners Leveling controls Extension WingsHandwheel, Dust Hood Caster To install the handwheel, do these stepsTo install the caster and foot pedal, do these steps To check the gearbox oil level, do these steps Connecting to PowerGearbox Oil Level To perform a test run, do these steps Test RunTighten V-Belts Recommended AdjustmentsBasic steps of operating the planer are as follows OperationsGeneral Basic OperationOperation Tips Feed control knob positions Feed SpeedBed Rollers Adjustment Height Range 002-0.020To adjust the bed rollers, do these steps Planer Accessories AccessoriesOperations Maintenance Schedule MaintenanceCleaning Pulley Alignment on To adjust/replace the V-belts, do these stepsBelts Lubrication To inspect the knives, do these steps ServiceInspecting Knives To set the knives, do these steps Setting/Replacing KnivesChain Tension To adjust the chain tension, do these stepsMaximum Allowable Tolerances Table ParallelismTable micro-adjustment screws To adjust the table parallelism, do these stepsDistance Below Knife Edge at *BDC Rollers, Breaker Pressure Bar HeightsLocation Service Spring Tension To adjust roller spring tension, do these stepsTo calibrate the scale, do these steps Scale CalibrationLoosen the chip deflector mounting bolts see Figure Anti-kickback fingers Anti-Kickback FingersExample of checking belt Alignment Pulley AlignmentMotor junction box W1754 Electrical ComponentsW1754 20 Planer With Mobile Base Problem Possible Cause Corrective Action TroubleshootingCutting Headstock Assembly Parts Breakdown PART# Description Headstock Assembly Parts ListCutterheadpulley Gearbox Parts Breakdown Gearbox Parts List Base Breakdown Base Parts List Table Breakdown & List Columns Breakdown Columns Parts List Labels & Cosmetic Parts Warranty Page Comments Warranty RegistrationBOX BELLINGHAM, WA