Black & Decker FS1802BN Operating Instructions, LED Status Indicator Figure, Actuating Tool

905013144 wo depth 11/28/06 7:43 AM Page 8

Operating Instructions

LED Status Indicator (Figure 3)

The electronic indicator tracks the status and condition of the nailer. There are two basic indicators:

•A flashing RED light indicates that the nailer has a jammed nail.

•A permanent RED light indicates that the battery is low or out of power and needs to be charged.

3

Using the Lock-Off (Figure 4)		4
The nailer is equipped with a lock-off switch which prevents the
tool from actuating. To engage, push the lock-off to the full
rearward position as shown in figure 4.
Loading the Tool (Figure 5)
CAUTION: Keep tool pointed in a safe direction when loading
nails.		5
CAUTION: Never load nails with the contact trip or trigger
activated.
CAUTION: Always engage lock off and remove battery
pack before loading or unloading nails.
To load fasteners:
1.	Read all “Safety Warnings” before using tool.
2.	Engage lock off.
3. Remove battery.
4.	Depress pusher release and pull magazine back.
5.	Insert fasteners into the side of the magazine. Be sure the
	fasteners ride on their tips in the nail channel as shown in
	figure 5A.

6. Push magazine closed until it 5A locks in place.

Actuating Tool

WARNING: Always wear eye and ear protection when operating tool.

To operate the nailer:

1.Disengage lock off.

2.Insert battery pack and lock in place.

3.Depress the contact trip firmly against the work surface.

4.Depress and maintain pressure on the trigger.

CAUTION: A nail will fire each time the trigger is depressed as long as the contact trip remains depressed.

8