Emerson SZV44 Checking the Oil Level, Oil Capacity and Type, Oil Level Guidelines Minimum Speed

Page 25

Dual-Compressor Module

Maintenance

4.3Checking the Oil Level

The proper oil level varies according to the Compressor Module’s operating speed. To check the oil level on the first-stage oil separator level gauge, use the following guidelines based on operating speed.

NOTE

The oil level indicated on the first-stage oil separator sight tube varies with inlet and discharge pressures as well as operating speed. Check the oil level when the compressor is running.

4.3.1Oil Level Guidelines - Minimum Speed

When operating the Compressor Module at minimum speed—2400 rpm, 40 Hz— check the oil level in the oil level sight tube, shown at right, then refer to the following suggested maintenance actions.

If the oil level is:

Take this action:

• 1"– 3" from the bottom

No action is required.

of the oil level gauge

 

Lower than 1” from the bottom Add factory-supplied PAO oil to this level (see 4.5.1 - Topping Off the Oil Level on page 20).

• Higher than 3” from the bottom Remove excess oil

(see 4.5.2 - Changing the Oil on page 21).

4.3.2Oil Level Guidelines - Maximum Speed

When operating the Compressor Module at maximum speed—4800 rpm, 80 Hz— check the oil level in the oil level sight tube, shown at right, then refer to the following suggested maintenance actions.

Oil level sight tube

If the oil level is:

Take this action:

• 1"– 3" from the top of the oil

No action is required.

level gauge

 

Lower than 3” from the top Add factory-supplied PAO oil to this level (see 4.5.1 - Topping Off the Oil Level on page 20).

• Higher than 1" from the top

Remove excess oil

 

(see 4.5.2 - Changing the Oil on

 

page 21).

4.4Oil Capacity and Type

The factory oil charge of the SZO Compressor Module is 380 fluid ounces (11.25 liters).

Use the special Poly-Alpha-Olefin (PAO) blend available from the Packager. Refer to Appendix A - Material Data Safety Sheet on page 30 for details.

CAUTION

The Compressor Module REQUIRES a special PAO blend available from your Packager.

Do NOT substitute other types of oil. Using other types of oil will damage the equipment and void the warranty.

19

2006SSD-75 R4 (10/10)

Image 25
Contents Copeland Scroll Compressor Module Page Table of Contents Appendix A Material Data Safety Sheet Figures Compressor Module Nomenclature Important Safety Information Safety Symbols Used in This Manual Safety Alert SymbolIntroduction Compressor ModuleOil coolers with fans Compressor Package CompressorInlet gas scrubber for liquid removal General Installation Guidelines Installation GuidelinesInlet and Discharge Pressures Required Component-Inlet Gas ScrubberBarg Setting Ambient Temperature RangeModule Weight Lbs. kg Compressor Module Dimensions, in. mm Installation Clearance and DimensionsCode Description Process and Instrumentation Diagrams P&IDsSwitchStatus SwitchesElectrical Controls General ConsiderationsBrushless DC Fan Oil Cooler Fan ControlSZO44 Temperature ControlDrive Variable SpeedCompressor Power data based on 480VAC Variable Speed Typical Compressor Module power supply requirementsElectrical Requirements Control Circuit Terminations WiringPost-Startup Checklist Pre-Startup ChecklistInitial Startup Compressor Module OperationCheck for These Conditions Under Normal Operation Maintenance Routine MaintenanceMaintenance summary Maintenance Tools Maintenance ToolsOil Capacity and Type Checking the Oil LevelOil Level Guidelines Minimum Speed Oil Level Guidelines Maximum SpeedTopping Off the Oil Level Adding and Removing OilAdding Oil Draining Oil Changing the OilReplacing Oil Servicing the Scavenge Line Orifice Cleaning the Inlet ScreenChanging the Oil Filter Element Changing the Second-Stage Separator ElementTroubleshooting Troubleshooting GuideMotor Winding Resistance Motor winding resistancePlatform troubleshooting guidelines Platform Symptoms DiagnosisSpecifications Compressor Module Specifications Dual-Compressor Module Technical Support and Service Max Flow/HP as a function of discharge Configuration Suction130 140 110110 120 Flow rate150 180Supplier Appendix A - Material Data Safety SheetEmergency Number 989 Product Name and Information Components and Hazard StatementFire and Explosion Hazards Spill or Leak ProceduresReactivity Data Health Hazard DataPage Page EmersonClimate.com
Related manuals
Manual 44 pages 48.85 Kb