SUPER MICRO Computer SBI-7426T-S3 user manual Security Menu Options

SBI-7426T-S3 Blade Module User’s Manual

Choose Security from the AMI BIOS Setup Utility main menu with the arrow keys to bring up the SECURITY SETUP menu (Figure 6-3). Security setting options are displayed by highlighting the setting using the arrow keys and pressing <ENTER>. All Security BIOS settings are described in Table 6-17below.

	Table 6-17. Security Menu Options
Menu Option	Description
Supervisor Password	This displays whether a supervisor password has been entered for the system.
	“Not Installed” means that a Supervisor password has not been used.
User Password	This displays whether a user password has been entered for the system. “Not
	Installed” means that a User password has not been used.
Change Supervisor	Select this option and hit the <ENTER> key to access the sub-menu and then
	type in the Supervisor's password in the dialogue box to set or change the
Password
	Supervisor password, which allows access to the System’s BIOS.
	Select this option and hit the <ENTER> key to access a sub-menu with the
	following options;
	• Full Access (default) – This grants full user read and write acces to the
	BIOS Setup Utility.
Change User	• VIEW ONLY – This allows access to the BIOS Setup Utility, but does not
	allow the fields to be changed.
Password
	• LIMITED – This allows only limited fields to be changed such as DATE and
	TIME.
	• No Access – This prevents User access to the BIOS Setup Utility.
	NOTE: This option is only available when the Supervisor Password has been set
	above.
Clear User Password	This option allows you to clear a user password after it has been entered.
Password Check	This item allows you to check a password after it has been entered. The options
	include Setup and ALWAYS.
Boot Sector Virus	When ENABLED, the AMI BIOS displays a warning when any program or virus
	issues a Disk Format command or attempts to write to the boot sector of the hard
Protection
	disk drive. Options include ENABLED and Disabled.

6-16