SUPER MICRO Computer SBI-7426T-S3 user manual Chapter Blade Module Features, Description

Chapter 4

Blade Module Features

Figure 4-1. SBI-7426T-S3 Blade Module Front View

This chapter describes the SBI-7426T-S3 blade module. Installation and maintenance should be performed by experienced technicians only.

See Figure 4-1for a front view of the blade unit and Table 4-1for its features.

Table 4-1. SBI-7426T-S3 Blade Module Features

Feature

Processors

Memory

Storage

Ports

Features

Power Consumption

Description

Supports single or dual 1366-pin Intel Xeon 5500 series processors

Supports up to 96 GB/24 GB of VLP ECC Registered/Unbuffered ECC DDR3-1333/1066/800 SDRAM in twelve DIMM slots

Three 2.5" hot-plug SAS2/SATA hard disk drives

KVM port (1)

Onboard Hermon graphics chip, IPMI 2.0, ATA/100, Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3, Real Time Clock, Watch Dog,

Base Power Draw (~35W) / Power per CPU (60W/80W/95W) / Power per DIMM (typically 14.5W)

4-1